25 October 2013
Drama Llama
I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Zlata M you can get the tubes Here
Scrap kit used Drama Llama by Bibi Collection you can find her amazing kits Here
Template used template 72 by Millie, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
*~Font i used~*
Apantasia
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Delete layer 8,7,6 and 5.
Make raster 1 active and open paper 9 and paste as a new layer.
add some gradient glow to it in pink with the settings you prefer.
Then add some bright noise to it so it stands out little.
Make layer 2 active and open paper 11 and paste as a new layer.
add some gradient glow to it in pink with the settings you prefer.
Then add some bright noise to it so it stands out little.
Make layer 3 active and open paper 5 and paste as a new layer.
add some gradient glow to it in pink with the settings you prefer.
Then add some bright noise to it so it stands out little.
Make layer 4 active and open paper 4 and paste as a new layer.
add some gradient glow to it in pink with the settings you prefer.
Then add some bright noise to it so it stands out little.
Open tube of choice and paste as a new layer on top of raster 4.
~*Elements*~
Open element 13 and paste in the back of your tag, duplicate and move around until you
get the result you are looking for.
Open element 25 and paste as a new layer on top of layer 4 to the left.
Open element 30 and paste it to the back of your tag, duplicate and mirror until you get it
as you want.
Open element 42 and paste it on to raster 4 dulpicate and mirror, and duplicate and mirror again.
Open element 46 and paste on to the tube layer.
Open element 48 and paste it were you want it.
Open element 52 and resize to fit back of your tag, duplicate and flip it.
Open element 61 and paste as a new layer, duplicate and mirror...
Open element 62 and paste on to the tube layer to the left.
Open element 79 and paste as a new layer were you want it.
Add copyright, tagname and we are done!
Written By Curiouz 25th Oct
Labels:
Bibi Collection Ct
|
0
comments
22 October 2013
I Must Feed
I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
*~Supplies Needed~*
Tube of choice i used the scary art of Xeracx you can get the tubes Here
Scrap kit used Pumpkin 2 by Kristin you can find her amazing kits Here
(This is a Satc Exclusive)
Template used template 233 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
VanDerLee-Unplugged X - Interlace
*~Font i used~*
Grave Digger
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Make raster 9 active and open paper 4 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Now make copy of raster 9 active and use paper 4 again and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 8 active and open paper 6 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make copy of raster 8 active and use paper 6 again and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 7 active and open paper 2 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make copy of raster 7 active and open paper 2 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 6 active and open paper 9 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and mix.
Make copy of raster 6 active and open paper 9 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and mix.
Make raster 5 active and open paper 8 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and lighter.
Now make the raster 5 layer active again and go to eyecandy4000 - fire and add some fire effect to the layer with these settings:
Direction: 90
Column Length : 150
Flame Width: 15
Movement: 33
Check denser flames
Duplicate the layer and flip.
Make copy of raster 3 active and invert the colors.
Make raster 3 active and add a new raster layer to it and flood fill with white.
Merge down.
Take some parts of your tube of choice and paste in to the raster 3 layer.
Duplicate and mirror. Then go to properties and add some lumincance legacy to it,
duplicate again and go to properties again and add some screen to it.
Then go to VanDerLee and add some interlace to it with the settings you prefer.
Now make copy of raster 2 layer active and invert the color on it.
Then move up to raster 2 and make it active and open paper 1 and paste as a new layer.
~*Elements*~
Open frame 3 and resize to 450 x 450 and paste as a new layer on top of the raster 2 layer.
Open web and duplicate and merge down, add some gradient glow to it in color you prefer and flip it,paste it as a new layer on top of copy of raster 3.
Open splatter and paste as a new layer behind your tag, duplicate and move around as you like.
Open lights and resize to 677 x 63 and paste on top of the web.
Open swirls and resize to 40% and paste into the frame duplicate and mirror.
Open your tube and paste it on top of your tag.
Open sparkles and paste as a new layer over the tube.
Open pumpkin 2 and paste it to the right down beside your tubes feet.
Add these words " I Bite You Bleed, You May Scream But I Must Feed"
Now add copy Right and tag name and we are done!
Written By Curiouz 22th Oct
Labels:
Toxic Desirez Ct
|
0
comments
15 October 2013
Bloody Kiss
I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Barbara Jensen you can get the tubes Here
Scrap kit used Zombiefied (this is exclusive at scrapcandy) by Kristin
you can find her amazing kits Here
Template used template 208 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Xero - Radience
VanderLee - Interlace
Dsb Flux - Bright Noise
*~Font i used~*
Jellyka Love and passion
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Make raster 12 active and open paper 5 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
(But this is optinal)
Make copy of raster 12 active and use the paper 5 again and paste it as a new layer.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 11 active and open paper 4 and paste as a new layer.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 11 active and open paper 4 again and paste as a new layer.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 9 active and open paper 11 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 9 active and open paper 11 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 10 active and open paper 7 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 10 active and open paper 7 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 8 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 8 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use red color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 7 active and open paper 10 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 7 active and open paper 10 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 5 active and open paper 4 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 5 active and open paper 4 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make raster 6 active and open paper 5 and paste as a new layer,invert and delete.
Add some gradient glow to it with the settings you prefer. I use blue color from
the scrap kit and i use the width 3.00
I also add some bright noise to it as well with the intensity 35
Make copy of raster 1 active and open paper 1 and paste as a new layer,invert and delete.
Make raster 3 active and add some bright noise with these settings: intensity 35 Darker
Make copy of raster 13 active and add a new raster layer and flood fill with red and add some bright noise with these settings: intensity 35 Darker
Make raster 14 active and open paper 1 and paste as a new layer.
add some gradient glow to is this time use color white and same settings as before.
~*Elements*~
Open web and paste it as a new layer on top of raster 13.
Open brad and paste it behind both raster 11.
Open city and paste as a new layer behind raster 5.
Open frame 3 and paste as a new layer on top of raster 13.
Open splatter and paste as a new layer move to bottom, duplicate and mirror as you like.
Open the tube of choice and paste as a new layer were you want it.
Open sparkles and paste on top of your tube.
Now add the words
"Take me from this earth
an endless night-
this, the end of life.
From the dark I feel your lips
and taste your bloody kiss."
Add copyright and tagname and we are done!
Written By Curiouz 15th Oct
Labels:
Toxic Desirez Ct
|
0
comments
12 October 2013
Toxic Waste
I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Danny Lee you can get the tubes Here
Scrap kit used Toxic by Bibi Collection you can find her amazing kits Here
Template used template 115 by Pooker, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
*~Font i used~*
A Stitch Plus Ninie
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Start by delete these layers: "Black dot,Black frame,White square, black rectangle and white rectangle. (these are the ones that are small) Lt yellow square 1 and 2.
Now make Lt yellow square4 active and open paper 1 and paste as a new layer.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer but i use black color, and width 3.00
Add some bright noise to it as well with the intensity 35
Now go to the next layer and make the Lt yellow square3 active and open paper 1 and paste as a new layer.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer but i use black color, and width 3.00
Add some bright noise to it as well with the intensity 35
The next layer is Lt yellow circle3 go on and make it active and open paper 8 and paste as a new layer. Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer, but i use yellow, and width 3.00
Add some bright noise to it as well with the intensity 35
Make Lt yellow circle2 active and use paper 8 again and paste as a new layer. Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer, but i use yellow, and width 3.00
Add some bright noise to it as well with the intensity 35
Make black dotted circle 3 active and add a new raster layer and floodfill with yellow.
add some bright noise to it same settings as before.
Do this to dotted cirlce 2 as well.
Make black circle 2 active and open paper 6 and paste as a new layer,invert and delete.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer, but i use yellow, and width 3.00
Add some bright noise to the whole layer (the paper layer and border)it as well with the intensity 35
Make yellow rectangle active and open paper 1 and paste as a new layer.
Now we are adding some gradient glow to this in a color that matches our tag.
You can use whatever settings you prefer but i use black color, and width 3.00
Add some bright noise to it as well with the intensity 35
Make the Lt yellow circle active and open paper 9 and paste as a new layer and invert and delete.
Make the yellow circle active and add some bright noise to it same settings as before.
Make the black rectangle actvie and open paper 6 paste as a new layer, add gradient glow to it in yellow, then add bright noise to the whole layer, then add some bright noise to the yellow frame to.
~*Elements*~
Open element 86 and paste as a new layer on top of you tag.
Open element 12 and paste it on top of the black rectangle layer, duplicate it to you have 4
and place them next to eachother.
Then open element 2 and paste on top of them.
Open element 21 and paste it on top of the tellow frame layer.
Open element 20 and paste it as a new layer behind the black rectangle layer.
Open element 3 and paste it as a new layer on top of the black rectangle layer.
Open element 34 and resize it 40% paste it to the left side corner in the bottom of your tag.
Open element 16 and resize it 50% and paste on top of the element 34.
Open element 7 and paste behind all layers, duplicate and mirror.
Open element 30 and resize to 50% and paste it down in the corner with the lizard and barrel.
Open element 40 and paste as a new layer on top of the yellow frma layer.
Open element 50 and paste it behind your tag, duplicate and flip.
Open element 53 and paste it on top of yellow frame layer.
Open element 59 and paste it behind the toxic word frame and duplicate and mirror.
Open element 6 and paste it down in the left corner of your tag together with the lizard,barrel and ammo.
Add the words"I've turned down so many people that would treat me like a queen and I run back to the person that's the most toxic for me." with the fornt of choice.
Now add you tube of choice and copyright and tagname and we are done.
Written By Curiouz 12 Oct 2013
Labels:
Bibi Collection Ct
|
0
comments
09 October 2013
Too Cute Too Spook
I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
*~Supplies Needed~*
Tube of choice i used the cute art of Alfadesire you can get the tubes Here
Scrap kit used Trickster by Kristin you can find her amazing kits Here
Template used halloween template 3 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright noise
Xero - Radience
L en K - Dimitri
Unplugged X - Interlace
*~Font i used~*
The loyalist
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
delete raster5.
delete words 1 and 2.
Make circle left active and open paper 19 and paste as a new layer,invert and delete.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make circle right active and open paper 19 and paste as a new layer,invert and delete.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make yellow rectangle active and open paper 21 and paste as a new layer,invert and delete.
add some bright noise to the yellow rectangle with the settings you prefer.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make orange rectangle active and open paper 7 and paste as a new layer,invert and delete.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make white circle active and open paper 17 and paste as a new layer,invert and delete.
Add some black or orange gradient glow to it width: 3.00
Then add some bright noise to it as well with the settings you prefer.
Make pixel word layer active and change the color to a darker orange color.
~*Elements*~
Open filmstrip and add a new raster layer, floodfill with black.
Move the floodfilled layer to bottom.
Now takes parts from the tube you are going to use and paste them as a new layer on to the black layer as a new layer, use your selection tool and remove access bits.
Then go to properties - luminance legacy and add some radience to it as well with these settings: 33- 84 - 194 - 151
Then go to L n K filter and use the Dimitri filter with these settings:
control: 5
Then we are going to add some interlace to it as a finish touch, go to your unplugged x filter and
choose interlace with these settings:
1- 50 - 50 - 1- 0- 50
transparency: 0
Normal
Then add a new raster layer this time white and move to bottom and merge down.
Add this on top of your tag.
Open splatter and paste as new layer, move to bottom and duplicate and rearrange as you like.
Open sparkles and paste as a new layer on top of the filmstrip.
Open house and paste it behind the filmstrip layer, then let only the roof of the house stick out on the top of the layer. Delete the bottom part.
Open lights and paste them in the bottom of the filmstrip.
Take the tube of choice and paste it on to your tag.
Open frame 4 and paste as a new layer behind black rectangle 1.
add some gradient glow to it.
duplicate and flip.
Open doodle 2 and paste as a new layer behind filmstrip.
Add the words "Too Cute Too Spook" with font of choice
add copyright and tagname and we are done :)
Hope you enjoyed my tutorial.
Written By Curiouz 9th Oct
Labels:
Toxic Desirez Ct
|
0
comments
28 September 2013
Good Vs Evil
I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Verymany you can get the tubes Here
Scrap kit used Devilish by Bibi Collection you can find her amazing kits Here
Template used template 57 by Pooker, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
*~Font i used~*
1001head
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Delete layer dottedrect & Dottedcircle & Redbits.
Make black rectangle layer active and open paper 2 and paste as a new layer,invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Then make black rectangle layer active again and add some bright noise to it
with settings: Intensity: 42 Darker
Make Dkgrayrect active and open paper 8 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Make pink circle layer acitve and open paper 9 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Then makepink circle layer active again and add some bright noise to it
with settings: Intensity: 42 Darker
Make Redrect activeand open paper 9 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Then makepink circle layer active again and add some bright noise to it
with settings: Intensity: 42 Darker
Make pink rects active and open paper 6 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Make white circle active and open paper 1 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Merge down layers aroow 1 & 2 and add some bright noise to them
with settings: Intensity: 42 Darker
Add some white/black gradient glow to it with 3.00 as width.
Make the left square active and add a new raster layer to it, flood fill with colors of choice
and merge down.
Do this to right square as well.
Now make the word art layer active and flood fill "GOOD" White and the "S" in Vs.
Then flood fill the "EVIL" Black and the "V" in Vs.
Now add some gradient glow to it in Dark Red
Add some bright noise to it as well with same settings as before.
~*Elements*~
Open element 76 and 72 and resize both to 241 x 241, paste the black circle frame on top of the red one, then duplicate it and take them and post over the layers right square and left square to
make frames.
Then open the tubes you wanted to use and resize to fit into the frames, duplicate and delete access. Do this to both right and left square layer.
Go to the right and left square layer and delete left over parts that sticks outside the frames
use your selection tool.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Open element 8 & 9 and resize them to 241 x 241
And paste them were you lie them.
Open element 75 and paste it as a new layer on top of Blackrect.
Make white cirlce active and open element 69 and paste into selection.
Duplicate and flip.
Open element 43 and paste as a new layer on top of left square.
Open element 15 and paste it on top of right square.
Open element 53 and paste on top of layer pinkrects.
Open element 57 resize to 57% and paste behind your tag.
Add copyright, tagname and we are done!
Written 28 Sep 2013 By Curiouz
Labels:
Bibi Collection Ct
|
0
comments
27 September 2013
W.I.T.C.H
I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Celine Art you can get the tubes Here
Scrap kit used Witchy by Bibi Collection you can find her amazing kits Here
Template used template 121 by Millie, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Fritillary
*~Font i used~*
Forelle
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Make layer 1 active and add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 2 active and add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 3 active and add a new raster layer, flood fill with a purple color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 4 active and add a new raster layer, flood fill with a purple color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 5 acitve and add a new raster layer, flood fill with a black color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 6 acitve and add a new raster layer, flood fill with a black color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 7 active and open paper 1 (moon) add as a new layer, invert and delete.
make the layer 7 active again,invert and delete.
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Open tube of choice and add as a new layer.
Open element 33 and paste as a new layer on top of layer 7 duplicate and mirror.
Open element 8 and paste on top of layer 5 duplicate and mirror.
Open element 41 resize to 85% and change the color on the frame to black or purple.
Paste it as a new layer.
Open element 56 and paste as a new layer were you want it.
Open element 11 and paste it down in the left corner.
Open element 14 and paste it onto the curtains, duplicate,mirror.
Open element 10 resize to 40% paste it were you want it.
Open element 78 and paste on top of the crystal ball.
Add copyright, tagname and word art and we are done!
Written By Curiouz 27 Sep 2013
Labels:
Bibi Collection Ct
|
0
comments
23 September 2013
I'll bite you scream
I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Arthur Crowe you can get the tubes Here
Scrap kit used Webbed and exlusive at ScrapCandy by Kristin you can find her amazing kit Here
Template used template 203 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Radience
*~Font i used~*
Blade 2
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Start by delete raster 3, copy of raster 8, raster 8, and raster9.
Make raster 7 active and open paper 10 resize to 400 x 400 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer active and use paper 10 again and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 6 active and open paper 1 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 6 active and open paper 1 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 5 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 5 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 4 active and open paper 5 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 4 active and use paper 5 again and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 1 active and add a new raster layer and flood fill with the color you prefer, take a part of the tube you are going to use for you tag, and paste into it.
Then right click the layer, and go to properties - luminance legacy.
add some radience to it with these settings: 138 - 20 - 39 - 200
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy (2) of raster layer 1 active and add a new raster layer and flood fill with the color you prefer, take a part of the tube you are going to use for you tag, and paste into it.
Then right click the layer, and go to properties - luminance legacy.
add some radience to it with these settings: 138 - 20 - 39 - 200
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 2 active nad open paper 6 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
~*Elements*~
Make raster 3 active and open string and paste as a new layer.
Open frame 1 and resize 430 x430 and paste as a new layer on top of the webbed string layer.
Open tube you are going to use and paste as a new layer behind the frame, duplicate and move the other part to the top, invert and delete. Use you selection tool to remove parts out side the frame on the top layer.
Open splatter and paste behind your tag, duplicate,mirror,duplicate,flip,duplicate and flip.
Open sparkles and paste as a new layer on top of your tube layer.
Open bat and resize to 40% and paste it were you like it.
Open flame and resize by 50% and flip it to the left and paste it behind your star frames, duplciate and mirror.
Open lightning rezie by 50% and paste it were you want it, duplicate and mirror.
Open rose resize by 50% and paste them were you want it.
Open wire and paste as a new layer on top of raster 5 duplicate,mirror.
Add the words "I'll bite you scream"
Add copyright and tagname and we are done!
Hope you enjoyed my tutorial
Written By Curiouz 23 Sep 2013
Labels:
Toxic Desirez Ct
|
0
comments
20 September 2013
The Lady Is A Vamp
I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
*~Supplies Needed~*
Tube of choice i used the gorjuss art of The Hunter you can get the tubes Here
Template used Vamp temp by Justine, you can download it over at the Misfit blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Radience
*~Font i used~*
Taggetes
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Make the copy of raster 3 active and open paper 1 and paste as a new layer, invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Now make copy of raster 3 part 2 active and open paper 9 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Make raster layer 9 active and open paper 7 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Make raster 6 active and open paper 10 and resize to 400 x 400 and paste as a new layer, invert and delete.
Make the copy of the vector layer 1 active and open paper 8 resize to 600 x 600 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Make raster layer 7 active and open paper 6 and resize to 400 x 400 and paste as a new layer,invert and delete.
Make the copy of vector 1 part 2 active and open paper 10 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Delete raster 3.
Now open up the tube ofchoice and paste as a new layer.
Add some radience to it with these settings:
128 - 50 - 128 - 255
~*Elements*~
Open element 17 and paste behind your tag duplicate it,mirror it and flip it to you got one in every corner of your tag.
Open element 16 and paste it behind raster 9, duplicate and flip.
Open element 18 rotate it to the left and paste it behind the raster 9.
Open element 25 and paste it on top of raster 9.
Open element 27 and paste as a new layer on top of raster 9.
Open element 30 and paste as a new layer were you want it.
Open element 31 and resize it to 151 x 149 and paste it as a new layer into the first frame picture then promote to layer and remove the parts that sticks outside the frame with your selection tool.
Open element 32 resize it to 448 x 248 and paste it behind raster 9 and let the curten show in bottom of raster 9.
Then duplicate and mirror, then dulpicate and flip.
Make raster 7 active and open element 43 resize it to 400 x 400 and paste as a newl ayer,invert and delete.
Make raster 8 active and open element 43 resize it to 400 x 400 and paste as a newl ayer,invert and delete.
Open element 48 resize it to 40% and paste it were you want it.
Open element 50 resize to 50% and paste it on the bottom of your tag duplicate, mirror and move to bottom.
pen element 68 and paste it on top of your tube layer, duplicate and mirror.
Open element 83 resize to 50% then paste it were you want it.
Open element 97 resize to 80% then paste it behind the rip stone.
Now add copyright, tag name and we are done!
Hope you enjoyed my tutorial :o)
Written By Curiouz 20th Sep 2013
Labels:
Bibi Collection Ct
|
0
comments
Subscribe to:
Posts (Atom)
Take My Blinkie
Labels
- ©DoctorMacro Tubes (4)
- Animations (13)
- Bibi Collection Ct (42)
- Blog Layouts (2)
- Danny Lee Ct (10)
- Freebies (5)
- Gradients (2)
- My Tutorials (1)
- Notes (3)
- Toxic Desirez Ct (21)
- Word Art (5)
Favorite Shops
Terms of Use
Please download these from my blogsite only. Do not share the files in emails/groups/blogs etc. If you'd like to use them in a tag tutorial /group challenge - you can do that. But please direct others to my blogsite to download for themselves. And no linking to my download link itself - just the blogsite link, please. Personal use only please don't change any of the scraps or accents (Word art is ok to change color,size) Please do not change the file names or claim as your own, nor re-upload them to any file sharing sites. Thank you for downloading and have fun
My Licenses
Arthur Crowe - AC128
Barbara Jensen - BJ1551
Danny Lee - DL0014
Elias Chatzoudis - EAS11359
Gorjuss - SW2251
Keith Garvey - KG1057
Rachael Tallamy - 011066Curiouz
Roman Zaric - RZ083
The Hunter - APSS0144
Tony Tzanoukakis - TTZ115
TooshToosh - Toosh1365
Verymany - VMT_Curiouz
Xeracx - IRM015A
Zindy Zone - ZZT1089
Ami - AMICURIZ
Cilm - CI3927LM
Cdo - Cdo-2090
Dreamscape Imaging - DSI780
My psp tubes - MPT8644
Pics For Design - PFD_Curiouz
Pte - PTE0758
Satc - SATC0096
StickerChick - Stickerchick3120
The psp Project - TPP00144
Up Your Art - UpYourArt3406
Translate
Popular Posts
-
I use paint shop 9 for my tutorials You should know your way around in paint shop to use this tutorial... THIS IS WHAT WE ARE G...
-
I use paint shop 9 for my tutorials You should know your way around in paint shop to use this tutorial... THIS IS WHAT WE ARE GOING TO MAK...
-
I use paint shop 9 for my tutorials You should know your way around in paint shop to use this tutorial... THIS IS WHAT WE ARE GOING ...
-
I use paint shop 9 for my tutorials You should know your way around in paint shop to use this tutorial... THIS IS WHAT WE ARE GOING TO MAK...
-
I use paint shop 9 for my tutorials You should know your way around in paint shop to use this tutorial... THIS IS WHAT WE ARE GOING TO MAK...
-
I use Paint Shop 9 for my tutorials,you should know your way around in paint shop to use this tutorial... ~¤This is what we are go...
-
This is what we are going to make: This tutorial was written for those who have a working knowledge of PSP For my tutorials I ...
-
I use paint shop 9 for my tutorials You should know your way around in paint shop to use this tutorial... THIS IS WHAT WE ARE GOING TO MAK...
-
I use Paint Shop 9 for my tutorials,you should know your way around in paint shop to use this tutorial... ~¤This is what we are go...