29 June 2012

postheadericon Rainbow Dreams

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
THIS IS WHAT WE ARE GOING TO MAKE!




TOOLS NEEDED

Tube of choice i am using the art of Jasmine Becket Griffith you can buy  HERE
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Enchanted"  By Bibi you can find the kit HERE
Template By  Tracy 
Font used: fely
Plugins used Xero - EyeCandy4000

OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Start with circle mark and open paper 9
Steal a purple color from the paper
Now go to gradient glow 
With these settings:   
Glow Width: 11.00
Soft Corners: 25%
Overall Opacity: 100
Now move up to rectangle mark and open paper 4 and resize to 70%
and paste as a new layer.
Open element 54 and paste as a new layer on top of all layers.
Now open element 1 paste as a new selction on circle make sure it shown behind the dragon then duplicate and mirror it.
Open element 89 and resize to 34% and paste on the rectangle layer behind the dragon and duplicate and mirror.
Open element 82 and paste behind the dragon.
go to rectangle layer mark and open element 80 and paste as a new layer and use your moving tool to move it so it looks like gras behind the dragon.
Open element 53 resize to 34% and paste behind the dragon.
Open element 47 and paste it as a new layer behind the dragon.
set opacity on the layer to 74%
Open element 28 resize to 27% and paste in top corner of the rectangle.
Open element 26 paste as a new layer behind the dragon duplicate and flip and mirror and set layer opacity to 52%
Open element 88 and paste as a new layer on the bottom layer.
Then add copyright info and signature and we are done=)

(WRITTEN BY CURIOUZ 29 JUNE 2012)


OTHER TUBES USED FOR THIS TUTORIAL!






27 June 2012

postheadericon Emo

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
THIS IS WHAT WE ARE GOING TO MAKE!




TOOLS NEEDED

Tube of choice i am using the art of  Arthur Crowe you can buy  HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Emo"  By Toxic Desirez you can find the kit HERE

Template 179 By  Kristin HERE

Font used 914 solid

Plugins used Xero - Unplugged X - EyeCandy4000

OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Start at the bottom mark layer "top black square and open paper 13 and add as a new layer.

Then move up to bottom black square mark and open paper 13 and add as a new layer.

Now go to rectangle layer and mark then add a new raster layer and choose a silver 
grey color and flood fill with it.
Use dbs flux - bright noise
With these settings: Intensity 41   Lighter
Then go to xero - fritillary
With these settings: 5 - 30 - 10 - 30

Move up to top red circle mark and open paper 19 and paste as a new layer.

Then bottom red circle and open paper 19 again and paste as a new layer.

Mark top round rectangle and open paper 7 and paste as a new layer.

Move up to bottom rectangle mark and open paper 7 again and paste as a new layer.

Move up to circle mark and open paper 9 and paste as a new layer.

Now you go to gradient glow and do this to all the tempalte layers.

First you choose the color white
With these settings: 
Gradient glow: 3.00 
 Soft Corners: 25
Overall Opacity: 100
Strong white half way on scale.

After you have done this to all template layer you
Choose color black
With these settings:
Gradient glow: 3.00 
 Soft Corners: 25
Overall Opacity: 100
Strong black over half way on scale.
Then you open tube of choice and paste as a new layer
and go to xero - radience
With these settings:  66 - 95 - 58 - 193

Open splatter and paste as a new layer on the background layer,
duplicate and mirror, duplicate again and flip and duplicate and mirror.

Open sparkle and paste as a new layer on the circle layer.

Open screw and resize to 24% and paste were you want it.

Open ribbon 1 and resize to 47% and paste were you want it.

Open glitter scatter and paste as a new layer on the background layer and duplicate and flip.
Open glitter trail and paste as a new layer on top of bottom and top round rectangle.

Then you choose your font and write Naughty Or Nice.
Add copyright and signature and we are done=)

(WRITTEN BY CURIOUZ 27 JUNE 2012)
23 June 2012

postheadericon SummerTime

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED
Tube of choice i am using the art of  Alexander McMillan you can buy  HERE

(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Orange Cream"  By Toxic Desirez you can find the kit HERE

Template 172 By  Kristin HERE

Font used Fely

Plugins used Xero - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Start from bottom with rectangle top mark with your magic wand tool and
open paper 8 and paste as a new layer.

Then move up to rectangle bottom mark with your magic wand tool and open paper 8 again and paste asa new layer.

Now move up to square top and use your dropping tool to steal a orange color from paper 7 and add a new raster layer and flood fill with the color you have choicen.
Go to xero - fritillary
With these settings: 5 - 33 - 19 - 53

Now move to square bottom and use your dropping tool to steal a orange color from  paper 7 and add a new raster layer and flood fill with the color you have choicen.
Go to xero - fritillary
With these settings: 5 - 33 - 19 - 53

Now move up to round rectangle top and open paper 7 and paste as a new layer.

Then to round rectangle bottom and open paper 7 and paste as a new layer.

Now move up to round rectangle and open paper 14 and paste as a new layer.

Now open the tube of choice and paste it as a new layer.
Then go to xero - radience
With these settings: 96 - 22 - 62 - 154 
Open tree 2 and paste it as a new layer duplicate and merge.

Open sparkles and paste as a new layer on top of round rectangle.
Open cloud and paste it were you like,
open flower 1 and paste it were you like.
Now add word art and copyright and we are done!

(WRITTEN BY CURIOUZ 23 JUNE 2012)
22 June 2012

postheadericon Emo Meow

I use paint shop 9 for my tutorials

You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of  Alfadesire you can buy  HERE

(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Emo Meow"  By Bibi you can find the kit HERE

Template 17  By Marieke 

Mask of choice

Font used Fely

Plugins used Xero - Dbs flux- EyeCandy4000

OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Start with circle 1 mark and open paper 6 and paste as a new layer.

Then move up to layer circle 2 and mark and open paper 7 and paste as new layer.

Move up to layer pink rectangle mark and open paper 2 and paste as new layer.

Now move up to black rectangle 1 and open paper 4 and paste as a new layer.

Now go up to pink rectangle 2 and open paper 1 and paste as a new layer.

Now go to black rectangle 2 layer and delete layer.

Open tube of choice and paste as a new layer.

Go to xero - radience

With these settings:  75 - 186 - 133 - 144

Now go to word art layer mark and go to

dbs flux - spider web

With these settings:  11 - 8 - 50

Open element 11 paste on top of pink rectangle 2 and duplicate and flip.

Open element 22 and paste as new layer on pink rectangle.

Open element 24 and paste on top of pink rectangle 1 and flip.

Open element 37 and paste as a new layer on top of tube layer.

Open element 47 and paste it were you like.

Now add copyright and signature and we are done!

(WRITTEN BY CURIOUZ 18 JUNE 2012)
18 June 2012

postheadericon Your Pain Is My Pleasure

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED
Tube of choice i am using the art of  Elias Chatzoudis you can buy HERE
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Emo Princess II"  By Bibi you can find the kit HERE
Template 3  By  Eyecandii HERE
Mask of choice i used mask by WSL299 HERE
Font used abeatbyKai
Plugins used Xero - Unplugged X - EyeCandy4000 - Dbs flux


OK LET US START!
Open up the template shift + d to duplicate it and close out the original.
Start from the bottom with layerlarge pink rectangle 
mark and open paper 1 and add as new layer.
Go to  xero - fritillary
Settings: 7 - 240 - 8 - 27

Move up to pink rectangle mark and use your dropper tool to steal a color from the tube, add a new raster layer and flood fill with the color you have choicen.
Go to  xero - fritillary
Settings: 4 - 71 - 43 - 34 

Move up to small pink reactangle mark and open paper 1 paste as new layer.
Go to  xero - fritillary
Settings: 7 - 240 - 8 - 27

Go to small pink rectangle dotted mark and use your dropper tool to
steal a color from the tube and add a new rasterlayer and flood fill with the color you have choosen.
Go to  xero - fritillary
Settings: 4 - 71 - 43 - 34 

So ove up to layer small gradient rectangle mark and add a new raster layer and flood fill with black.
Open tube you have choicen and use the face of it and paste as a new layer.
Go to Plugins - Xero - Porcelain
Settings: 50 - 128 - 128 - 0 - 0 - 255

Now move up to 3 garadient rectangles layer and mark use your dropper tool steal a color from the tube, and flood fill with the color you have choosen.
Go to  xero - fritillary
Settings: 4 - 71 - 43 - 34 

Open tube of choice and paste as new layer on top of all layers.
Go to plugins - xero - porcelain
Settings: 50 - 128 - 128 - 0 - 0 - 255

Now open element  12 paste up on  3 gradient rectangles layer,
duplicate and flip.
Open a new canvas 766 x 600
flood fill with black, add mask of choice
and merge.

Duplicate and move duplicated mask layer on top of pink rectangle.
Open element 4 and paste as new layer on top of all layers
Gradient Glow : 3.00

Open element 18 and paste were you want.
Gradient Glow: 3.00

Open element 60 and paste on top of 3 dotted black rectangles 
Gradient Glow: 3.00

Open element 71 and paste on top of pink rectangle, duplicate and flip.
Choose font and size 48 stroke width 1,0

Write "Your Pain Is My Pleasure"
and go to gradient glow 

Settings: Gradient Width: 6.75  Soft Corners: 25 
Overall Opacity: 100
Then go to plugins - dbs flux - spider web
Settings: 12 - 7 - 50

Now add copyright and we are done!

(WRITTEN BY CURIOUZ 18 JUNE 2012)
17 June 2012

postheadericon Kiss My Shamrock

I use paint shop 9 for my tutorials.
You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED 

Tube of choice im using art Misticheskaya of you can find her art HERE
please dont use this tube without the proper license to do so.
Scrap kit used is "Kiss my shamrock" by Toxic Desirez you can find her kits HERE
Template 168 by Kristin HERE
Mask of choice 
Plugin used: Xero, Unplugged x, eyecandy4000

OK LET US START!
Ok open up the template shift +d to duplicate it close out the original. 
Start with left square layer mark with your magic wand tool open paper 17 and paste as new layer.
now go to unplugged x - TV RGB
With these settings: Transparency : 37 Normal

Move up to layer right square mark with you mwt and open paper 17 again and paste as new layer.
now go to unplugged x - TV RGB
With these settings: Transparency : 37 Normal

Now go to pink top rectangle and open paper 16 and paste as new layer.
go up to pink bottom rectangle open paper 16 and paste as new layer.

Move up to blue top rectangle mark with your mwt and open paper 18 and paste as new layer.
dbs flux - spider web
With these settings:  10 - 1 - 50

Then blue bottom rectangle mark with your mwt and open paper 18
and paste as new layer.
dbs flux - spider web
With these settings:  10 - 1 - 50

Now move up to rounded rectangle mark and open paper 2 paste as new layer.
Now go to unplugged x - interlace
With these settings: 3 - 53 -  2 - 1 - 0 - 1
Move up to Circle mark and open paper 1 and paste as new layer.
Now open paper 18 and use this with mask of choice..
Paste your tube as a new layer.
Open kiss my shamrock word art and paste as new layer on top of rounded rectangle.
open sparkles 2 and paste as new layer on top of circle.
open leaves and paste as a new layer on top of circle
open butterfly paste were you like.
Open frame 2 resize 70% and paste as new layer on top of circle.

Now add word art, signature and copyright and you are done!
(WRITTEN BY CURIOUZ 17 JUNE 2012)
14 June 2012

postheadericon Pandorable


I use paint shop 9 for my tutorials.
You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED 
Tube of choice im using art Alfadesire of you can find her art HERE
please dont use this tube without the proper license to do so.
Scrap kit used is "Pandorable" by Kristin you can find her kits HERE
Template  Emo Misfits  by Kristin
Mask of choice 
Plugin used: Xero, Unplugged x, eyecandy4000
Font: Aaargh

OK LET US START!
Ok open up the template shift +d to duplicate it close out the original. 

Start with delete thses layers: Credits , Wordart by kristin , wordart back.

Now start at the bottom with layer Purple Rectangle 1 mark with your magic wand tool open paper 18 and paste as new layer - invert and delete.
VanDer Lee - Unplugged X - Interlace
With these settings:  1 - 50 - 50 - 1 - 0 - 50  Soft Light

Move up to Purple Rectangle 2  mark with your magic wand tool open paper 18 and paste as new layer - invert and delete.
VanDer Lee - Unplugged X - Interlace
With these settings:  1 - 50 - 50 - 1 - 0 - 50  Soft Light

Then Pink Rectangle 1 mark with your magic wand tool open paper 25 and paste as new layer - invert and delete.
VanDer Lee - Unplugged X - Interlace
With these settings:  1 - 50 - 50 - 1 - 0 - 50  Soft Light

Then Pink Rectangle 2 mark with your magic wand tool open paper 25 and paste as new layer - invert and delete.
VanDer Lee - Unplugged X - Interlace
With these settings:  1 - 50 - 50 - 1 - 0 - 50  Soft Light

Move up to Rectangle and open paper  9 and paste as new layer - invert and delete.
VanDer Lee - Unplugged X - Interlace
With these settings:  1 - 50 - 50 - 1 - 0 - 50  Soft Light

Go to "Glitter Circle" mark add new raste layer  flood fill with black
then go to dbs flux - bright noise
With these settings:  Intensity: 42  Mix

Now move up to "Circle" and add a new raster layer, flood fill with white and open tube of choice. Add as a new layer invert - delete and merge.
Now go to tube layer mark right click - properties - luminance legacy 
then go to xero - radience
With these settings: 56 - 42 - 34 - 192 

Then go to VanDer Lee - Unplugged X - Interlace 
With these settings:  1 - 50 - 50 - 1 - 0 - 50  Screen

Now go to Thin Black Rectangle 1 & Thin Black Rectangle 2 and do this 
Mark open paper 7 add as new layer - invert and merge.
VanDer Lee - Unplugged X - Interlace
With these settings:  1 - 50 - 50 - 1 - 0 - 50  Soft Light

Now go to layer Dotted rectangle 1 and 2 go to layers - new adjustment layer - hue/saturation/lightness
With these settings: choose  colorize -  lightness - 65

Use paper 21 and add a mask of choice and move to bottom
Open pandorable word art and paste as a new layer on top of rectangle.
VanDer Lee - Unplugged X - Interlace
With these settings:  1 - 50 - 50 - 1 - 0 - 50  Soft Light

Open element frame 1 and add to layer circle as a new layer.
open barbed heart and paste as a new layer were you ewant it.
open wire and paste as a new layer on  glitter circle
Open chain and add were you want  it.
Open splatter and paste it were you want on top of rectangle.
open flame and rotate it and paste on top of rectangle.
mirror it.
Now you add the text "i m not messy i am creative" with the font you choosen and add signature  and copyright
And we are done!

(WRITTEN BY CURIOUZ 14 JUNE 2012)


13 June 2012

postheadericon Bailando


I use paint shop 9 for my tutorials.
You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED 
Tube of choice im using art Alexander McMillian of you can find his art HERE
please dont use this tube without the proper license to do so.
Scrap kit used is "La Playa" by Bibi you can find her kits HERE
Template by Aqua template 1
Mask of choice 
Plugin used: Xero, eyecandy4000
Font Used: Sergo prin

OK LET US START!
Ok open up the template shift +d to duplicate it close out the original. 

Start with deleting these layers:  gray left strip, gray strip, black left strip, black right strip...

Now start from the bottom with the layer side backs, open tube of choice and paste into the frames.
Duplicate and mirror the duplicatet layer.

Now right click and go to properties - luminance legacy
Then go to plugins - xero - radience 
With these settings:  157 - 123 - 208 - 248 

Now  move up to side frames and mark and open paper 6 add as new layer and merge down, now go plugins - dbs flux - spider web
With these settings:  180 - 57 - 66

Now go to frame back and mark open paper 4 and add the tube of choose as a new layer, duplicate it and move up to top.
Now go to the top and remove overflood of tube to make it look like she is standing out of the frame. Use your free hand tool to do so..

Now right click and go to properties - screen
Then go to plugins - xero - radience 
With these settings:  36 - 66 - 119- 217

Now move up to big frame mark and open paper 6 again paste as new layer merge down and go to plugins - dbs flux - spider web
With these settings:  180 - 57 - 66

Use the paper 4 and add a mask of choice  duplicate and mirror it.
Open element 12 and resize to 70% and paste as a new layer on top of mask layer. duplicate it and go to plugins - dbs flux - bright noise
With these settings:  Intensity : 33  Mix
Open element 21 paste were you want it duplicate and mirror it.
Open element  22 and paste it in every corner of the tag and merge down.

Open element 25 and paste in front of all layers on the bottom of the big frame layer.
Open element 67 and paste on top of the tube layer behind the flower layers and duplicate and mirror.
Now merge down and go to plugins - eyecandy4000 - gradient glow
With these settings: color white:  Glow width: 3.00  Soft Corners: 56   Overall Opacity: 78
Now open element  59 and paste it into the sidebacks layers as you like ¨to make a water effect.
Open element 60 paste were you want it.

Open element 57 and paste it behind flowers,ferns and seastars.
Open element 53 and paste it on top of big frame layer set opacity to 62

Now find the lyrics/word art you want to add and do that.

Add copyright and signature and we are done=)

(WRITTEN BY CURIOUZ 13 JUNE 2012)


08 June 2012

postheadericon Bad Girls Do It Better


I use paint shop 9 for my tutorials.
You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED 
Tube of choice im using art of Verymany you can find her art HERE
please dont use this tube without the proper license to do so.

Scrap kit used is "Anarchy Girly Style" by Toxic Desirez  HERE
Template by Toxic Desirez used template 143   HERE
Mask of choice  i used Kristin mask 1 
Font Used - Fely

Plugin used:
Eyecandy4000 - Gradient glow
Xero - Radience
Xero - Fritillary
Unplugged X - Interlace

OK LET US START!

Ok open up the template shift +d to duplicate it close out the original. 
delte these layers : Lg stars, dotted line1, sm stars, Thin Rectangle,
Start at the bottom with layer Upper Left Rectangle mark and open paper 26 paste as a new layer and merge down.
Now go to plugins - unplugged x - interlace
With these settings:  2 - 46 - 15 - 1 - 0 - 1 - 0   Darken
Now move up to layer Lower Right Rectangle mark and open paper 26 again and paste as a new layer and merge down.
Now go to plugins - unplugged x - interlace
With these settings:  2 - 46 - 15 - 1 - 0 - 1 - 0   Darken
Move up to layer  Upper Right Circle 2 and mark and open paper 21
and paste as new layer and merge down.
Go to plugins - xero - fritillary
With these settings: 4 - 124 - 32 - 0
And then Lower Left Circle 2 mark and open paper 21
and paste as new layer and merge down.
Go to plugins - xero - fritillary
With these settings: 4 - 124 - 32 - 0
Now go to pink circle layer and open paper 16 paste as new layer and merge.
Go to plugins - xero - fritillary
With these settings: 4 - 124 - 32 - 0
Now move up to layer Frame Back Left open tube of chocie and mark and add the part you want from the tube as a new layer.
duplicate the the tube layer and go to properties and choose luminance legacy. 
Now go to plugins - unplugged x - interlace
With these settings:  2 - 46 - 15 - 1 - 0 - 1 - 0   Darken
now go to Frame Back Right and do the same.
Now open paper 2 and use the mask of choice
then duplicate and mirror it.
Now open up the tube you are going to use and paste as a new layer
then go to plugins - xero - radience 
With these settings:  0 - 124 - 106 - 255

Open wire and paste as a new layer on pink circle.
open sparkles and paste as a new layer behind the tube layer and duplicate and flip it.
open glitter 2 and paste as a new layer on Lower Right Rectangle.
open flower1 and paste on top of all layers were you want it.
Now you open the font you want to use and Write "Bad Girls Do It Better"
Add copyright and signature and you are done:o)

(WRITTEN BY CURIOUZ 8 JUNE 2012)

postheadericon Kisses To My Haterz


I use paint shop 9 for my tutorials.
You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED 
Tube of choice im using art of Danny Lee you can find his art HERE
please dont use this tube without the proper license to do so.
Scrap kit used is "Black-n-white" by Addictive Pleasures you can find her kits HERE
Template by CrazyCakesScraps HERE
Mask of choice  i used Kristin mask 5
Font used for name : Fely
Plugin used: Xero, Unplugged x, eyecandy4000

OK LET US START!
Ok open up the template shift +d to duplicate it close out the original. 
Start from the bottom at layer 8 mark and open paper 5 add as new layer.
Add drop shadow  
With these settings:  V 2    H  2  Opacity: 31 
Move up to layer 9  go to plugins - vander lee - interlace
With these settings:  2 - 75 - 40 - 1 - 0 - 1  Transparency: 0  Darken
Now move up to layer called 2 and mark and open paper 6 add as new layer.
Go to plugins - eyecandy4000 - gradient glow
With these settings:  color pink  Glow Width: 5.00        soft corners: 25
Overall Opacity: 100
Now move up to layer named 3 mark and open paper 9 paste as new layer.
Move up to layer 5 and go to plugins - xero - fritillary
With these settings:  4 - 124 - 100 - 66
Do the same to layer 6
Go to layer 7 and mark and flood fill with white
move up to layer 1 and go to layers- new adjustment layer - hue/saturation/lightness
With these settings:   Choose color cyan
hue: 0          saturation:  -100           lightness: 100
Go to layer 7 open tube close up of choice and paste it as a new layer
go to plugins - xero - radience
With these settings:    34 - 75 - 213 - 217 
Then go to vander lee- unplugged x - interlace
With these settings:    2 - 46 - 15 - 1 - 0 - 1
stay on  layer 7 and  find some  lyrics you want to put into the frame.
open sparkle2 and add to both layer 6 and 5
open web and paste on layer 8 duplicate - flip -mirror
Now you paste the tube of choice and go to plugins - xero - porcelain
With these settings:  50 - 128 - 176 - 106 - 124 - 112
 Open up a new canvas flodd fill with black and add your mask
duplicate mirror and flip.
Add copyright and name and we are done!
(WRITTEN BY CURIOUZ 8 JUNE 2012)

07 June 2012

postheadericon Summer Magic


I use paint shop 9 for my tutorials.
You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED 
Tube of choice im using art Elias Chatzoudis of you can find his art HERE
please dont use this tube without the proper license to do so.
Scrap kit used is "Magic Sea" by Bibi you can find her kits HERE
Template by Tinas Magical Scrap World HERE
Mask of choice i used MB & SW mask 17 HERE
Filter Used:  Unplugged x - Interlace
 Eyecandy4000 - Gradient Glow
Xero - Fritillary
Font used for signature: Fely

OK LET US START!

Ok open up the template shift +d to duplicate it close out the original. 
Delete these layers first : ©Info , Dotted Circles,
Start at the bottom on layer  "spots" mark and open paper 9 add as new layer. 
Go to plugins - Dbs flux - Bright noise
With these settings:   Intensity: 45 Darker
Then add a drop shadow
With these settings:   H 2      V 2          Opacity 60              Blur 4
 change the H&V to -2
Now move up to layer "pink square" mark and open paper 10
add as a new layer - invert and delete.
Then go to plugins - xero - fritillary
With these settings:  5 -  32 - 52 - 131
Now move up to layer "small square1" mark and open paper 9 add as new layer.
Then go to plugins - xero - fritillary
With these settings:  5 -  32 - 52 - 131
Then add a drop shadow
With these settings:   H -2      V -2          Opacity 60              Blur 4
Now move up to layer "small square2" mark and open paper 9 add as new layer.
Then go to plugins - xero - fritillary
With these settings:  5 -  32 - 52 - 131
Then add a drop shadow
With these settings:   H -2      V -2          Opacity 60              Blur 4
Go to layer "center circle" mark and open paper 4 paste as new layer 
do the same to layer "left circle and right circle" to.
Then go to xero - fritillary
With these settings:  5 - 32 - 18 - 67 
Go to layer "right circle and add drop shadow 
With these settings:   H 2      V 2          Opacity 60              Blur 4
Then go to layer "right circle" and add drop shadow 
With these settings:   H -2      V -2          Opacity 60              Blur 4
Then go to layer "center circle" and add drop shadow
With these settings:   H -2      V -2          Opacity 60              Blur 4
Then again but this time
With these settings:   H -2      V -2          Opacity 60              Blur 4
Now you go to layer "center rec" and open up the tube of choice and use a part of the tube then mark, add as new layer -  invert and delete
same to the "left rec" and "right rec"
then right click -properties - luminance legacy duplicate and go to properties again and choose screen.
Do the same to the tube layer on  "left rec" and "right rec"
Then you  go to tube layer "center rec"  plugins - VanDer Lee - Unplugged X - Interlace 
With these settings:   1- 50 -50 -1 - 0 - 50 Transparency: 0 Normal
Do this again to "left rec" and "right rec" tube layers.
Then take the tube of choice and paste it as a new layer on top of all layers,
move it with your moving tool were you want it to be.

Then you open paper 4 and go to layers - load/save mask  and find the mask you want to use then you add it to the background layer. 
Open element 100 (shell) and paste it on the layer under the tube layer on the bottom.
open element 104 and paste it on top of the close up background.
duplicate it and mirror.
open element 47 and paste it on top of the right rectangle and again on each sides.
open element 91 and paste it on top of pink square layer and go to 
Eyecandy4000 - Gradient Glow 
With these settings:  Glow Width: 3.00   Soft Corners: 25    
Overall Opacity: 100

Open the sand element and paste it under the tube layer.
duplicate and move it what you think looks best.
Add copyright and name and you are done :o)

(WRITTEN BY CURIOUZ 7 JUNY 2012)


01 June 2012

postheadericon Rogue Beauty


I use paint shop 9 for my tutorials.
You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!




TOOLS NEEDED 

Tube of choice im using art Zlata M of you can find her art HERE
please dont use this tube without the proper license to do so.
Scrap kit used is "Rogue" by Bibi you can find her kits HERE
Finish this tag Template by Missy
Mask of choice 
Plugin used: Xero,eyecandy4000, dbs flux, 

OK LET US START!

Ok open up the template shift +d to duplicate it close out the original. 
Delete layer "glittered gradient star" 
Start off with layer "glittered rectangle left" go to new layer - adjustment layer - hue/saturation/lightness 
with these settings:   hue: 40  saturation: 0   lightness: -24
Move up to "glittered rectangle right"  and do again as you did above.
 new layer - adjustment layer - hue/saturation/lightness 
with these settings:   hue: 40  saturation: 0   lightness: -24
Now move up to "rectangle left" and mark and open paper 11 and add as a new layer - invert and delete.
and now "rectangle right" 
Go to "rectangle center" and new layer - adjustment layer - hue/saturation/lightness 
with these settings:   hue: 40  saturation: 0   lightness: -24
Small left & right circle layer do this new layer - adjustment layer - hue/saturation/lightness 
with these settings:   hue: 40  saturation: 0   lightness: -24
*Then go to plugins- dbs flux- bright noise 
With these settings:  intensity: 18   Darker 
again go to plugins- xero - fritillary
With these settings:  3 - 30 - 7 - 19 
Go to layer "glitter rectangle 1"  make it black then go to 
plugins - dbs flux
With these settings:  intesity: 23 Lighter

No move up to "rectangle center 2" and mark and open paper 11
add as a new layer - invert and delete.
Go to layer "rectangle with glitter" and  new layer - adjustment layer - hue/saturation/lightness 
with these settings:   hue: 40  saturation: 0   lightness: -24

Now move up to "circle 1 center mark and open paper 11
Now layer "glittered circle center" mark and add a new raster layer and flood fill with red and go to plugins - dbs flux 
With these settings:  Intensity: 25 Darker

Now move to "dotted circle center" and go to layers - new adjustment layer - hue/saturation/lightness 
 With these settings:  Hue: 40  Saturation: 0 Lightness: 24 

Now open up your close up tube of choice and mark layer "circle 2 center" and paste it as a new layer invert and delete.

Duplicate the close up layer and close the duplicated layer. Then right click and go to properties and choose - Luminance legacy
then open up the closed off duplicated layer and go to plugins - xero - radience 
With these settings:  128 - 50 - 128 - 255
Now open element 9 and paste it as a new layer on rectangle left and rectangle right" 

open element  44 and paste it on top of  rectangle center 2.

open element 39 and paste on to the star layers, both of them.

open element 28 and paste on to of large circle layer.
open element 16 and paste on to small circle layers, duplicate and mirror.

open element  43 and paste on layer rectangle with glitter.

paste apple and piaono element in the bottom of that.



(WRITTEN BY CURIOUZ 26 MAY 2012)

Take My Blinkie

Take My Blinkie

Terms of Use

Please download these from my blogsite only. Do not share the files in emails/groups/blogs etc. If you'd like to use them in a tag tutorial /group challenge - you can do that. But please direct others to my blogsite to download for themselves. And no linking to my download link itself - just the blogsite link, please. Personal use only please don't change any of the scraps or accents (Word art is ok to change color,size) Please do not change the file names or claim as your own, nor re-upload them to any file sharing sites. Thank you for downloading and have fun

I Ct For

My Licenses

Arthur Crowe - AC128


Barbara Jensen - BJ1551


Danny Lee - DL0014


Elias Chatzoudis - EAS11359


Gorjuss - SW2251


Keith Garvey - KG1057


Rachael Tallamy - 011066Curiouz


Roman Zaric - RZ083


The Hunter - APSS0144


Tony Tzanoukakis - TTZ115


TooshToosh - Toosh1365


Verymany - VMT_Curiouz


Xeracx - IRM015A


Zindy Zone - ZZT1089


Ami - AMICURIZ


Cilm - CI3927LM


Cdo - Cdo-2090


Dreamscape Imaging - DSI780


My psp tubes - MPT8644


Pics For Design - PFD_Curiouz


Pte - PTE0758


Satc - SATC0096


StickerChick - Stickerchick3120


The psp Project - TPP00144


Up Your Art - UpYourArt3406





Follow by Email

Translate

Contributors

Blog Friends

Popular Posts