09 October 2012

postheadericon Velvet

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
 
THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED
Tube of choice i am using the art of Celine Art you can buy HERE
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Velvet" By Toxic Desirez you can find the kit HERE
Exclusive SATC Template By Kristin
Mask of choice i used mask Linesgrid mask 5 by Kristin HERE
Font used Amal
Plugins used Xero - Unplugged X - EyeCandy4000


 
OK LET US START!
Open up the template shift + d to duplicate it and close out the original.
Make top rectangle active and open paper 6 and paste as a new layer.
make bottom rectangle active and open paper 6 again and paste as a new layer.
Make top circle active and open paper 5 and paste as a new layer.
Go to effects- dbs flux - bright noise
With these settings:
Intensity: 40
Mix
Make bottom circle active and open paper 5 again and paste as a new layer.
Go to effects- dbs flux - bright noise
With these settings:
Intensity: 40
Mix
Make top square active
Go to effects- dbs flux - bright noise
With these settings:
Intensity: 40
Mix
Make bottom square active
Go to effects- dbs flux - bright noise
With these settings:
Intensity: 40
Mix
Make ractangle active and open paper 16 and paste as a naew layer.
Open tube of choice and paste as a new layer.

Elements:
Open web and rezie to 74% and paste behind the tube.
go to gradient glow take a purple from the tube and set glow to 3
and duplicate and flip.
Open bubbles and place behind the tube and duplicate and mirror.
Open filmstrip and add a new raster layer and take parts of the tube and paste into the frame and merge all together when you are happy.
Open sparkles and paste asa newl ayer up on top of the filmstrip layer.
Open kitty and paste behind the tube layer next to her legs.
Open flower 1 resize to paste on top of top circle and bottom circle.

Make background layer active and flood fill with black.
add mask and merge.
Add copyright and signature, and we are done=)
(WRITTEN BY CURIOUZ 09 OCT 2012)


05 October 2012

postheadericon Colorful Player

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Danny Lee you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Emo Marie" By Amy Marie you can find the kit HERE

Template 120 By Creative by nature HERE

Font usedPlugins used Franklin Gothic 

Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Make 11 active and open paper 7 and paste as a new layer.

Make 10 active and open paper 6 and paste as a new layer.

Make 8 active and open paper 4 and paste as a new layer.

Make 7 active and open paper 4 and paste as a new layer.

Make 6 active and open paper 8 and paste as a new layer.

Remove layer 3,4 and 5

Go to effects - VanDer Lee - Unplugged X - Interlace

With these settings: 1-50-50-1-0-50
Normal

add this effect to all template layers.
Then add drop shadow to all layers as well.


Now take the tube of choice and paste it were you want it.

Elements:
Open sparkle 2 and paste it behind the tube.
Open skullylilly1 resize to 38% and paste behind tube.
Open frame 5 and paste behind tube.


Add copyright and signature and were done:o)

(WRITTEN BY CURIOUZ 18 JUNE 2012)
01 October 2012

postheadericon Vengeance


I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of  Alex Prihodko you can buy  HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Toxic Terror" exclusive misfit kit  By Toxic Desirez

Exclusive TPP Template  By  Kristin 

Font used Amal

Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Make pink top rectangle active and open paper 20 and paste as a new layer.

Make pink bottom rectangle active and open paper 20 again and paste as a new layer.

Make top circle active and open paper 8 and paste as a new layer.

Make bottom circle active and open paper 8 again and paste as a new layer.

Make blue top rectange active and open paper 6 and paste as a new layer.

Make blue bottom rectangle active and open paper 6 again and paste as a new layer.

Make top square active and open paper 10 and paste as a new layer.

Make bottom square active and open paper 10 and paste as a new layer.

Make oval active and open paper 7 and paste as a new layer.

Remember to add shadow to all layers.



Frame: 

Open filmstrip add a new raster layer floodfill with color of choice
and move to bottom.

Now take the parts you want from the tube you are going to i use and paste it into to the frame 4 times.

Then merge the tube layers down and 

go to xero - radience 
with these settings:
128-50-128-255
Then go to background and go to
VanDer Lee - Unplugged X - Interlace
With these settings:
1-50-501-0-50
Normal

Then merge all layers and paste as a new layer on to template.

Elements: 

Open bow2 resize to 40% and paste it were you want it.

Open charm and paste under the bow2.

Open sparkle and paste as a new layer onto oval layer.

Open splatter paste as a new layer on top oval layer.

Open web resize to 55% paste behind filmstrip and duplicate and flip it.

Open spider and resize to what you like and paste as a new layer on top of the web.

Now add signature and copyright and we are done=)


(WRITTEN BY CURIOUZ 01 OCT 2012) 
28 September 2012

postheadericon Rebel Devil

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Verymany you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Sexy Little Devil" By Bibi you can find the kit HERE

Template 156 By Kristin HERE

Font used Arctik

Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Delete skulls,pixel words, circle,
Make left circle active and open paper 12 resize to 57% and paste as a new layer.
Make left glitter circle active and go to layers -new adjustment layer-
saturation-hue-lightness with these settings
Hue: 30
Saturation: 0
Lightness: -9

Make right circle active and open paper 12 again and resize to 57%
and paste as a new layer.
Make right glitter circle active and go to layers -new adjustment layer-
saturation-hue-lightness with these settings
Hue: 30
Saturation: 0
Lightness: -9


Make rectangle left active and open paper 4 and resize to 45% and paste as a new layer.
Make rectangle right active and open paper 4 and resize to 45% and paste as a new layer.
Make glitter rectangle active and go to layers -new adjustment layer-
saturation-hue-lightness with these settings
Hue: 30
Saturation: 46
Lightness: -4

Make wordart 2 active and open paper 4 and paste into selection.
Gradient 3 glow with light grey

Go to VanDer Lee - Unplugged x - Interlace with these settings:
1-50-50-1-0-50 Screen
Then gradient glow again 3 with light grey.

Open tube of chicue and paste as a new layer on top of star2 layer.

Go to xero-radience
With these settings:
13-112-225-181

Elements:
Open element 20 and paste it behind the tube into the rectangle layer, as amny times you want.
Open element 34 and paste behind the tube on to rectangle 2.
Open element 4 and paste as a new layer behind the tube.
Open element 46 and paste behind the tube.

Add copyright and signature and we are done=)
(WRITTEN BY CURIOUZ 28 SEPT 2012)

postheadericon I Only Look Innocent

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Danny Lee you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Emo Princess" By Toxic Desirez you can find the kit HERE

Template By JEK Creations HERE

Font used Andyfish

Plugins used EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Remove credit and R6 layers.

Make R11 active and open paper 6 and paste as a new layer.

Make R9 active and open paper 6 again and paste as a new layer.

Now make R5 active and open paper 8 and paste as a new layer.

Make R4 active and open paper 16 and paste as a new layer.

Make R3 active and open paper 16 again and paste as a new layer.

Make R2 active and open paper 9 and paste as a new layer.

Open tube of choice and paste it as a new layer.


Elements:

Open wire and paste it as a new layer on to R2

Open frame 2 and paste it as a new layer on to R2 over the wire.

Open chain 2 and resize to 52% and paste it right behind the tube.

Open divider and paste as a new layer on to R5 and duplicate and flip.

Open sparkles and paste as a new layer on to R1.

Add a new raster layer and move to bottom, open a paper from the kit and mask it with the mask of choice.

Now add copyright and signature and we are done=)


(WRITTEN BY CURIOUZ 27 SEPT 2012)

15 September 2012

postheadericon Little Boo

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Arthur Crowe you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Silly Monsters 2" By Toxic Desirez you can find the kit HERE

Template 185 By Kristin HERE

Font used Amal

Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Make top rectangle active and open paper 13 and paste as a new layer.

Make bottom rectangle active and open paper 13 and paste as a new layer.

Make top square active and open paper 12 and paste as a new layer.

Make bottom square active and open paper 12 and paste as a new layer.

Make black top rectangle active and open paper 14 and paste as a new layer.

Make black bottom rectangle active and open paper 14 and paste as a new layer.

Make circle active and open paper 6 and paste as a new layer.

Make rectangle active and open paper 20 and paste as a new layer.

Elements:

Open filmstrip and add a new raster layer and flood fill with white and
move to bottom.

Open tube and take 4 parts of the tube and paste into the filmstrip.

Merge all tube layers down and go to properties and choose luminance legacy
duplicate, choose soft light.

Go to the white layer and go to vanderlee - unplugged x - interlace

with these settings:

1-50-50-10-50
Normal

Then on both tube layers
go to xero- radience

With these settings:

128-50-128-255

Open wordart 1 and paste as a new layer on top of circle layer.

Open swirl 1 resize to 70% paste on top of bottom square layer
duplicate and mirror it.
duplicate again and flip and duplicate and mirror.

Open web resize to 63% and paste it on top of rectangle.
duplicate and mirror it, duplicate adn flip and duplicate and mirror.

Open sparkles and paste as a new layer on top of rectangle.

Open frame 4 and resize to 90% and paste as a new layer on top of
circle.

Open flame paste on top of rectangle duplicate and mirror it.

Open claws resize to 55% and paste on top of circle.

Open tube of choice and and paste as a new layer.

Add copyright and signature and we are done:)

(WRITTEN BY CURIOUZ 15 SEPT 2012)
13 September 2012

postheadericon Autumn Notes

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED
Tube of choice i am using the art of Arthur Crowe you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Autumn notes" By Bibi you can find the kit HERE

Template halloween templae 3 By Kristin HERE

Font used Amal

Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Make circle left active and open paper 1 and paste as a new layer.
Go to Xero-fritillary
with these settings:
5-30-10-0

Make circle right active and open paper 1 and paste as a new layer.
Go to Xero-fritillary
with these settings:
5-30-10-0

Make yellow rectangle active and go to
dbs flux - bright noise
with these settings:
intensity:38
Mix

Make orange rectangle active and open paper 1 again and paste as a new layer.
Go to VanDer Lee- Unplugged X- Interlace
With these settings:
Screen
1-50-50-1-0-50
Make glitter circle orange active
go to layers- new adjustment layer
hue/saturation/lightness
With these settings:
Master
hue: 23
Saturation:63
Lightness:31

Open up tube of choice and paste it were you want it.

Elements:

Open element 1 and paste behind tube.
duplicate and mirror it.

Open element 15 and paste on top of black circle.

Open element 20 and paste on top of orange rectangle, duplicate
and mirror it.

Open element 44 and paste behind tube.

Open element 52 resize to 48% and paste it behind the tube on orange rectangle layer.
duplicate and mirror it.

Open element 31 and paste it on top of circle layers duplicate flip and mirror it.

Open element 18 and paste it with the tubes waist.

Now add coyright and signature and we are done=)

(WRITTEN BY CURIOUZ 13 SEPT 2012)
11 September 2012

postheadericon Trick or treat

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Elias Chatzoudis you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Trick or treats" By Bibi you can find the kit HERE

Template Halloween template 7 By Kristin HERE

Font used Andyfish

Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Remove circle 1 layer,

Make circle right active and open paper 4 and paste as a new layer.
Then go to vanderlee-unplugged x- interlace
with these settings: 1-50-50-1-0-50

Make circle left active and open paper 4 and paste as a new layer.
Then go to vanderlee-unplugged x- interlace
with these settings: 1-50-50-1-0-50

Make left square active and choose a pink from paper 4 flood fill with it.
Then go to Xero- Fritillary
with these settings: 5-30-25-35

Make right square active choose a pink from paper 4 flood fill with it.
Then go to Xero- Fritillary
with these settings: 5-30-25-35

Make cirlce 2 active and choose a blue color from paper 4 and flood fill with it.
Make rectangle active and flood fill with purple color from paper 4
Then go to Xero- Fritillary
with these settings: 5-30-25-35

Now make pixel words layer active and make text black.
Then make dotted circle 2 active and make it black as well.

Open tube of choice and paste it as a new layer on to circle 2.

Elements:
Open element 7 and paste it as a new layer on dotted circle layer.
Open element 74 and paste on to both circle right and left.
Open element 11 and paste it on both sides of the tube.
Open element 26 and paste it of top of left and right squares.
Open element 6 resize to 77% and paste as a new layer on top of the tubes waist.
Open element 54 and paste as a new layer on top of rectangle.
Open element 70 and paste on to rectangle on both sides of the tube.
Open element 72 and paste it on top of rectangle and duplicate and mirror it.

Now add copyright and signature.
And we are done=)

(WRITTEN BY CURIOUZ 11 SEPT 2012)

01 September 2012

postheadericon Rock'N Roll

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Arthur Crowe you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Music Is My Life" By Toxic Desirez you can find the kit HERE

Template 183 By Kristin HERE

Mask of choice

Font used Lino Chisel for word art
and Tangerine for signature

Plugins used Xero - dbs flux - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Make top rectangle active and open paper 14 and paste as a new layer.

Make bottom rectangle active and open paper 14 again and paste as a new layer.

Make the white top rectangle active and open paper 8 and paste as a new layer.
Make bottom white rectangle active and open paper 8 and paste as a new layer.

Make grey top rectangle active and open paper 10 and paste as a new layer.

Make grey bottom rectangle active and open paper 10 and paste as a new layer.

Make grey top square active and open paper 9 and paste as a new layer

Make bottom grey square active and open paper 9 and paste as a new layer.

Make dark grey top rectangle active and open paper 23 and paste as new layer.

Make dark grey bottom rectangle active and open paper 23 and paste as new layer

Make circle active and open paper 26 and paste as a new layer.

Elements:
Open star circle and paste as a new layer behind the circle.

Open frame 1 and paste as a new layer on top of circle layer.

open cd and paste as a new layer under frame.

Find a lyric you like and paste onto cd layer.

Open sparkles and paste as a new layer on to the cd layer.

OPen music note star resize to 50% paste were you want it.

Paste tube of choice as a new layer.

Now with the font of choice and size 48 write Rock'n Roll

Use gradient glow if you want to.

Then take the font of choice for signature and write name in over the

rock'n roll text.

Now go to background layer and flood fill with color of choice and add mask
of choice.

Add copyright and we are done=)

(WRITTEN BY CURIOUZ 1 SEPT 2012)

postheadericon I Make Big Boys Cry

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of  Danny Lee you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Toxicity" By Toxic Desirez you can find the kit HERE

Template Emo misfits temp 2011 By Kristin HERE

Mask of choice

Font used WL Scribble Flinger

Plugins used Xero - dbs flux - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Delete word art layers.
Make purple rectangle 1 active and open paper 11 and
paste as a new layer.

Move up and make purple rectangle 2 active and open paper 11 again and paste as a new layer.

Make pink rectangle 1 active and open paper 7 and paste as a new layer.

Make pink rectangle 2 active and open paper 7 and paste as a new layer.

Move up to dotted rectangle 1 go to layers - new adjustment layer -
hue/saturation/lightness and mark "colorize" and press ok.

Move up to dotted rectangle 2 go to layers - new adjustment layer -
hue/saturation/lightness and mark "colorize" and press ok.

Now make rectangle active and open paper 21 and past as a new layer.

Make circle active and open paper 10 and past as a new layer.

Remember to drop shadow on the layers.
Open tube and paste as new layer.

Elements:
Open wire and paste as new layer on top of rectangle layer.

Open thorn border and resize to 40% paste on top of thin black rectangles

Now delete both thin black rectangle layers and add drop shadow.

Open up spider and paste it were you want it.

Now add a new raster layer and move to bottom.
flood fill with black and add mask of choice.


Add copyright,signature and wordart
And we are done=)


(WRITTEN BY CURIOUZ 01 SEPT 2012)

30 August 2012

postheadericon The Thing

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED
Tube of choice i am using the art of Alex Prihodko you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Coconut" By Bibi you can find the kit HERE

Template 182 By Kristin HERE

Mask of choice

Font used Dobkin

Plugins used Unplugged X - EyeCandy4000



OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Make top grey square active and open paper 1 (blue) and paste as a new layer
Make bottom grey square active and open paper 1 (blue) and paste as a new layer

Now go to vanderlee-unplugged x- interlace
with these settings:
1-50-50-1-0-50 soft light

do this action to both top and bottom grey square.

Now make top pink rectangle active and open paper 3 (green) and paste as a new layer.

Then make bottom pink rectangle active and open paper 3 (green) and paste as a new layer.

Now make top blue square active and open paper 3 (pink) and paste as a new layer.

Then make bottom blue square active and open paper 3 (pink) and paste as a new layer.
Now go to vanderlee-unplugged x- interlace
with these settings:
1-50-50-1-0-50 soft light

Do this action to both top and bottom blue square.

Move up to circle and open paper 1 (blue)
and paste as a new layer.

Now go to vanderlee-unplugged x- interlace
with these settings:
1-50-50-1-0-50 soft light

Remove these layers: stars,black thin rectangle, round rectangle and
creadits.

Now add some gradient glow to all your layers, you choose what color.
Or simply just add shadow.

Elements:
Mark circle and open element 67 and paste as a new layer, invert and
delete set opacity to 72%

Open element 1 and paste behind the cirlce layer were you want it and duplicate flip and mirror it.

Open element 21 and paste it as many times you want on top of top and bottom blue rectangle.

Open element 26 and paste as a new layer behind the circle layer.

Open element 27 and paste it on the side of the frame and duplicate
and mirror it.

Open element 31 and paste on top of cirlce and duplicate and mirror it.

Now go to background and make it active, flodd fill with a color
of choice, then add mask of choice.

Open element 57 and paste as a new layer on top of circle and duplicate and
mirror.

Now add signature and copyright and we are done=)
(WRITTEN BY CURIOUZ 18 JUNE 2012)
21 August 2012

postheadericon Mental Institution

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Danny Lee you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Hellz Angel" By Toxic Desirez you can find the kit HERE

Template 170 By Kristin HERE

Mask of choice i used mask 122 by Design By Vaybs HERE

Font used Suger Death

Plugins used Xero - Unplugged X - EyeCandy4000 - L & K Zitah


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Start at bottom and make thin top rectangle active, mark and open paper 3
and paste as a new layer.
Then go to Xero-Fritillary
With these settings: 5-30-10-21

Now make thin bottom rectangle active , mark and open paper 3
and paste as a new layer.
Then go to Xero-Fritillary
With these settings: 5-30-10-21

Now move up and make purple top rectangle active, mark and open paper 16
and paste as a new layer.

Move up and make purple bottom rectangle active, mark and open paper 16
and paste as a new layer.

Make blue top rectangle active, mark and open paper 10 and paste as a new
layer.

Make blue rectangle bottom active, mark and open paper 10
and paste as a new layer.

Make purple top rectangle active, mark and open paper 13 and
paste as a new layer.

Make purple bottom rectangle active, mark and open paper 13 and
paste as a new layer.

Now make pink cirlce left active, mark and flood fill with black
Then go to Xero-Fritillary
With these settings: 5-30-10-21

Then make pink cirlce right active, mark and flood fill with black.
Then go to Xero-Fritillary
With these settings: 5-30-10-21

Now make the circle active mark and open paper 11 and
paste as a new layer.

Elements:
Open web and paste it on top of cirlce layer.
Now open film strip add a new rater layer and flodd fill with black.
Then take parts of the tube and paste it into all the windows in the
film strip frame.
Now go to xero-radience
With these settings: 44- 58-189-222

Now merge only the tube layers, and duplicate.
Go to the original tube layer and go to properties - luminance legacy.
Then go to the duplicated tube layer and go to properties - screen.

Then again go to the original tube layer and go to plugins
L & K Zitah
With these settings: 5-33-37-47-69-66-57-32

Then again go to the duplicated tube layer and go to plugins
L & K Zitah
With these settings: 5-33-37-47-69-66-57-32

Then go to vanderlee- unplugged x-interlace
With these settings: 1-50-50-1-0-50
Do this to both orginal and duplicated tube layer.
Then merge all and paste the film strip as a new layer ontop of the web

Open doodle and put some gradient glow on it, then paste it behind the film strip.

Open splatter and paste it over the thin top layer then duplicate
and flip and mirror it and move it up to bottom thin rectangle.

Open sparkles and place it as a new layer on top of film strip.

Open skulls and paste them were you want.

Now flood fill the background layer with black, add mask of choice.

Now paste your tube as a new layer

Then add signature and copyright and we are done=)

(WRITTEN BY CURIOUZ 21 AUG 2012)
18 August 2012

postheadericon Homework

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Zlata M you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Total Rebel" By Toxic Desirez you can find the kit HERE

Template 174 By Kristin HERE

Mask of choice i used mask CMC-LinesGrids-mask1 by Kristin HERE

Font used Fely

Plugins used Xero - Unplugged X - EyeCandy4000-L & K Zitah


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Make top grey rectangle active then mark
go to Xero - fritalliry
with these settings: 7-30-12-39

Make bottom grey rectangle active then mark
go to Xero - fritalliry
with these settings: 7-30-12-39

Make top maroon rectangle active then mark
and open paper 9 and paste as a new layer.

Make bottom maroon rectangle active then mark
and open paper 9 and paste as a new layer.

Make top pink cirlce active mark and open
paper 7 and paste as a new layer.

Make bottom pink cirlce active mark and open
paper 7 and paste as a new layer.

Make top blue rectangle active then mark and open
paper 14 and paste as a new layer.

Make bottom blue rectangle active then mark and open
paper 14 and paste as a new layer.

Make balck round rectangle active, mark and open tube of choice and
paste as a new layer. Use your moving tool to get it were you want it.
Invert and delete, duplicate and mirror.

Duplicate both tube layers again so you have two of both of them.

Go to orginal tube layer 1 and go to properties - luminance legacy
then make orginal tube layer 2 active and go to properties - screen

Go to duplicated tube layer 1 and go to properties - luminance legacy
then make dupøicated tube layer 2 active and go to properties - screen

Go make black round rectangle active and go to
xero-fritillary
with these settings: 7-30-12-39

Now go to top orginal tube layer
then to unlpugged x - interlace
with these settings: 1-50-50-1-0-50

Then go to top duplicated tube layer
then to unlpugged x - interlace
with these settings: 1-50-50-1-0-50

Then do this to both top tube layers
go to L and K Zitah
With these settings: 5-33-37-47-69-66-57-32

Now make black circle active then mark and open paper 4
and paste as a new layer.

Now go back and add drop shadow to all the template layers i you did not do it already!

Elements:
take film strip and paste it behind the black round rectangle layer
duplicate and flip.

Open sparkles and paste as a new layer on top of the tube layers.

Open frame 2 and paste as a new layer on top of cirlce layer.

Open tube of choice and paste as a new layer on top of circle layer
duplicate and move on top of frame 2.

Use your free hand tool and remove parts of the tubes you do not want there so it looks like the girl is standing inside frame 2.

Put on some radience if you want to.

Open element flame and paste on top of top and bottom
grey rectangle, duplicate as many times you like
move and flip. i decided at this point to remove both
top and bottom grey rectangles it looked so much better
with only the silver flames=)

Now make background layer active and flood fill with black,
choose a mask and add.
Then add a new reaster layer and flood fill with a light grey color
go to dbs flux- bright noise
these settings: lighter 47
and add the same mask.
then duplicate the black mask layer and mirror it and move both black mask layer under the silver grey one.


Then add your signature,copyright and we
are done!

(WRITTEN BY CURIOUZ 18 AUG 2012)

postheadericon I don't care about my reputation

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Danny Lee you can buy HERE

(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Sweet Music 2" By Toxic Desirez you can find the kit HERE

Template 177 By Kristin HERE

Font used Dk Criss Cross, BillyBop

Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Start at bottom and make top black square active
mark with your magic wand tool and open paper 11
and paste as a new layer.

Make bottom black square active then mark and open paper 11
and paste as a new layer.

Move up and make top red circle active and open paper 9
and paste as a new layer...

Then move up to bottom red circle and make it active then mark and
open paper 9 and paste as a new layer.

Move up and make top rectangle active and mark and open
paper 2 and paste as a new layer.
Then go to Xero- Fritillary
With these settings: 7 - 30 - 12 - 39

Move up and make bottom red rectangle active mark and open paper 2
and paste as a new layer.
Then go to Xero- Fritillary
With these settings: 7 - 30 - 12 - 39

Make round rectangle active and flood fill with a light grey color and
open tube of choice and paste.
duplicate the tube layer and mirror it,
duplicate both tube layers.

Make the orginal tube layer active and go to properties and
choose luminance legacy, then go to the duplicated layer and choose
soft light.

Make the duplicated tube layer active and go to properties and
choose luminance legacy, then go to the duplicated 2 layer and choose
soft light.

Now go to xero . radiance
with these settings:
128-50-128-255
Do this to all tube layers.

Make round rectangle active again and go to
VanDer Lee - Unplugged X - Interlace
With these settings: 1-50-50-1-0-50

Move up and make circle layer active and mark and open paper 21
paste as a new layer.

Elements:
Open frame 1 and paste as a new layer on top
of circle layer.
Open element scatter and paste on background layer as a new layer and
duplicate adn flip it.

Open skull & web element and paste as a new layer behind round rectangle.
duplicate and flip it.

Open speaker and paste as a new layer on top of circle layer into the frame 1.

Open element wire and paste on top of frame1 and under the speaker layer.

open element note circle and paste as a new layer on top balck square layer.

Gradient glow with a red color.

Paste the tube of choice as a new layer and
go to Xero - Radience
This settings: 128-50-128-255

Now add the word art you want.
Signature and copyright and we are done:o)


(WRITTEN BY CURIOUZ 18 AGU 2012)

postheadericon Xeracx Fashion

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED
Tube of choice i am using the art of Ismael Rac you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Fashion" By Bibi's Collection you can find the kit HERE

Template kk temp10 By Kandi Kissez HERE

Font used Amaldemo

Plugins used Xero - Unplugged X - EyeCandy4000- L and K Zitah



OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Start by deleting credits, blue heart, stars and pink circle 1

Use your dropper tool and steal a pink color from paper 4
then make black rectangle active and flodd fill with the choosen color.
Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32
add drop shadow

Now move up to pink circle and make it active open paper 3
add as a new layer...

Move up to black circle and make it active mark and open
paper 2 and add as a new layer...

Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32
add drop shadow

Make blue rectangle active and mark and open paper 4
paste as a new layer..
add drop shadow.

Make angled rectangle active and mark and open tube of choice
and paste as a new layer, invert and delete.
Duplicate tube layer and make the orginal tube layer active
go to properties and choose luminance legacy.
Move up to duplicated tube layer and go to properties
and choose soft light..
Mark the orginal tube layer
Now go to plugin L And K
Zitah
With these settings:
5 - 33 - 37 - 47 - 69 - 66 - 57 - 32
Now go to the duplicated tube layer
Now go to plugin L And K
Zitah
With these settings:
5 - 33 - 37 - 47 - 69 - 66 - 57 - 32

Then mark the orginal tube layer again and go to
Xero- Radiance
With these settings: 128 - 50 - 128 - 255

Then mark the duplicated tube layer and
Xero- Radiance
With these settings: 128 - 50 - 128 - 255

Now make the white circle active and
go to Xero - Fritillary
With these settings:
7 - 30 - 12 - 39

Make white circle active
Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32
add drop shadow

Elements:
Open element 68 and paste on top of black cirlce layer.

Open element 14 and paste it on top of layer angled rectangle and
blue rectangle.

Open element 18 resize 60% and paste as a new layer on top of
pink circle layer 2.

Open element 22 and paste on top of black circle.

Open element 24 and paste on top of black rectangle were you want it.

Now add the signature and copyright:)

(WRITTEN BY CURIOUZ 18 AUG 2012)
04 August 2012

postheadericon Funy Buny

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
THIS IS WHAT WE ARE GOING TO MAKE!


TOOLS NEEDED
Tube of choice i am using the art of Alfadesire you can buy HERE
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Funy Buny" By Toxic Desirez you can find the kit HERE
Template 174 By Kristin HERE
Font used pixelette & Sugar death 2
Plugins used Xero - Unplugged X - EyeCandy4000
 
OK LET US START!
Open up the template shift + d to duplicate it and close out the original.
Start at the bottom with top grey rectangle mark and open paper 9
and paste as a new layer...
Move up to bottom grey rectangle mark and open paper 9 again
and paste as a new layer..
Move up to top maroon rectangle mark and open paper 8
and paste as a new layer...
On to bottom maroon rectangle mark and open paper 8 again
and paste as a new layer...
Move up to top pink circle mark and open paper 7
and paste as a new layer...
On to bottom pink circle mark and open paper 7
again and paste as a new layer...
Move up to top blue rectangle mark and open paper 10
and paste as a new layer...
Move on to bottom blue rectangle mark and open paper 10 again
and paste as a new layer...
Now move up to black round rectangle mark and open paper 21
and paste as a new layer..
Delete the layer black circle..
Remember to set drop shadow on all the layers
with these settings :
OV: 2,00
H: 2,00
AB: 50
Blur: 5,00
Color black
to the bottom layers
and
OV: -2,00
H: -2,00
AB: 50
Blur 5,00 color black
to top layers
Now drag the black round rectangle down two layers.
Elements:
Now open film strip and add a new raster layer and flood fill with a color from the kit and move to bottom.
Now take bits of the tube you want to use and paste into the frame as you like.
Then merke down the tube layers and go to properties
screen.
Then go to vanderlee - unplugged x - intelace
with these settings: 1 - 50 - 50 - 1 - 0 - 50
Merge down and paste as a new layer.
Now paste the tube of choice on top as a new layer.
Open bow 1 and resize to 40% paste on the filmstrip mirror it.
Open flame and resize to 70% and paste behind the filmstrip layer.
duplicate and mirror.
Open flower 1-2 and 3 and resize to 28% and paste them behind the filmstrip layer so they showes just on the edge of the filmstrip, duplicate and mirror them to get them as you want..
Open paw print resiza to 37% and paste as a new layer on top of the filmstrip duplicate and mirror...
Open sparkle 1 and paste as a new layer on top of bottom
blue rectangle and duplicate and flip...
Open splatter paste as a new selection on the left side behind the tag
duplicate,mirror,flip until you have coevered the whole background..
Take the word art and paste as a new layer behind the film strip..
Now add signature and copyright and we are done!
(WRITTEN BY CURIOUZ 4 AUG 2012)

postheadericon Endless Summer

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
THIS IS WHAT WE ARE GOING TO MAKE!


TOOLS NEEDED
Tube of choice i am using the art of Danny Lee you can buy HERE
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Emo Rock" By Toxic Desirez you can find the kit HERE
Template By Slow
Font used pixelette,clarck summit & Sugar Death 2
Plugins used Xero - Unplugged X - EyeCandy4000 - Vm Distortion - Dbs Flux

OK LET US START!
Open up the template shift + d to duplicate it and close out the original.
Start with bg layer open filter unlimited 2.0 and go to Vm distortion
Radial pox with these settings: 175 - 99 - 109 - 39
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
 
Now move on to 1 and open paper 21 and paste as a new layer.
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Open layers 2-3 and 4 and merge down
now mark and open paper 25 and paste as a new layer.
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Now on to 5 mark and open paper 16 and paste
as a new layer.
On layer 6 mark and open paper 15 and paste as a new layer.
Go to dbs flux - spider web
with these settings: 86 - 34 - 65
Delete layer 7-8
Go to layer 9 mark and open paper 17 and paste as a new layer.
Got to layer 10 mark and add a new raster layer and flood fill with black
On layer 9 - 10 use gradient glow 3.00 with color hot pink.
Now find a lyric you want and write into layer 10 with a green color from the tube.
Add tube and copyright and signature and we
are done!
(WRITTEN BY CURIOUZ 3 AUG 2012)

postheadericon Devilish Diva

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
THIS IS WHAT WE ARE GOING TO MAKE!


TOOLS NEEDED
Tube of choice i am using the art of Alex Prihodko you can buy HERE
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Dazzling" By Bibi you can find the kit HERE
Template kk 29 By Kandi Kissez HERE
Font used pixelette and dr carbfred.
Plugins used Xero - Unplugged X - EyeCandy4000- Enkis Filter- Dbs Flux
 
OK LET US START!
Open up the template shift + d to duplicate it and close out the original.
Start at bottom and mark left frame back and open paper 2
paste as new layer invert and delete.
Duplicate and mirror and delete the right frame black.
Now move up to circle mark and open paper 1
and paste as a new layer.
Delete the polaroids, filmstrip back1, faded strip, film strip 1 layers.
Elements:
Open element 93 and paste it ob top of the film strip back 2 and 3.
Use gradient glow 3.00
Open Element 16 and paste it on to the circle layer and duplicate and flip it.
Open element 18 and paste on to circle layer.
Open element 24 and paste on circle layer.
Open element 34 and paste onto left frame back duplicate and mirror, duplicate and flip and duplicate and mirror again.
Open element 4 and paste on to left frame back duplicate and mirror.
Open element 62 and paste on to glitterframe were you want it and duplicate and mirror.
Now go to circle and open filter unlimited 2.0 and find enkis filter
and Jon Mullen's Japaese fan and add
Open element 76 and paste on to circle duplicate and flip.
Open element 89 and paste it were you want it.
Now open up the tube of choice and paste it as a new layer.
Go to Xero - Radience
with these settings: 136 - 65 - 107 - 227
Now move the word art were you want it and go to dbs flux - spider web
with these settings: 3 - 6 - 69
Now add copyright and signature and
we are done!
(WRITTEN BY CURIOUZ 3 AUG 2012)
21 July 2012

postheadericon Steampunk Cutie

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
THIS IS WHAT WE ARE GOING TO MAKE!


TOOLS NEEDED
Tube of choice i am using the art of Alex Prihodko you can buy HERE
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Steampunk Cutie" By Toxic Desirez you can find the kit HERE
Template 185 By Kristin HERE
Mask Lines_Grinds mask 3 By Kristin HERE
Font used calligraPhillip
OK LET US START!
Open up the template shift + d to duplicate it and close out the original.
Start from the bottom with bottom rectangle mark and open paper 15
and paste as a new layer.
Move up to top square and mark and open paper 15
paste as a new layer..
Now move up to layer called top square mark and open
paper 11 and paste as a new layer
Then move on to bottom square layer mark and open paper
11 and paste as a new layer.
Now on to black top rectangle mark and open paper 12
paste as a new layer.
Then on to the bloack bottom layer mark and open paper 12
and paste as a new layer.
Move up to circle layer mark and open paper 14
and paste as a new layer.
Move up to the rectangle layer mark and open paper 13
and paste as a new layer.
Open new canvas 750 X 650 flood fill with black
open mask of choice and add, paste as a new layer
on the background layer.
 
Elements:
Open up the filmstrip and add a new rater layer and flood fill with the
color of choice and move to bottom.
Now open the tube of choice and resize so you get the size you need,
paste some of the parts of the tube as new layers on to the flood filled background.
Then use the selection tool to remove overflood so it looks neat and nice.
Right click and choose properties choose screen.
Then go to unplugged x - interlace
With these settings: 1 - 50 - 50 - 1 - 0 - 50
Now merge all and paste as a new layer on top of rectangle layer.
Open element star and gear swirl and paste as a new layer on top
of backgroun layer, duplicate, mirror and flip.
Open element sparkles and paste as a new layer on top of
circle layer.
Open element bow 1 resize to 29% and paste in both upper corner of the filmstrip.
Open cluset frame and paste as a new layer on to circle layer.
Open the steam punk label and paste it near the tubes legs.
Now add signature and copyright!
(WRITTEN BY CURIOUZ 21 JULY 2012)

postheadericon Kiss My Azz

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED
Tube of choice i am using the art of  Skyscraps you can buy  HERE
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "KissMyAzz"  By Bibi Collection you can find the kit HERE
Template 184 By Kristin HERE
Font used calligraPhillip

OK LET US START!
Open up the template shift + d to duplicate it and close out the original.

Start at the bottom with top circle mark and open paper 3 (pink) and paste as a new layer.
Now move up to bottom circle mark and open paper 3 (pink) and paste as a new layer.

Now move up to top square mark and open paper 3 (blue) and paste as a new layer.
And now on the bottom square mark and open paper 3 (blue) and paste as new layer.

Move up to top rectangle layer mark and open paper 6 and paste as a new layer.
Then up to bottom rectangle layer mark and open paper 6 and paste as a new layer.

On the round rectangle layer mark and open paper 2 and paste as a new layer..

Now go to circle layer and open paper 3 (blue) and paste as a new layer.

Open the tube of choice and resize to what size you need and paste as a new layer on top of circle.
Elements:
Open element 67 and paste as a new layer on top of circle layer.
Open element 69 and paste as a new layer on background.
Open element 10 and paste on the bottom square layer so it shows, 
duplicate and flip.
Open element 11 and paste it as a new layer on the cirlce layer.
Open element 12 and paste on top of circle layer.
Open element 26 and paste under circle layer duplicate
and flip..
Open element 32 and paste were you want them.
Open element 21 and paste it were you want it.
Open element 50 and paste it as a new layer on top of circle layer.
Open element 51 and paste as a new layer on top of circle layer.
Open element 80 and paste as a new layer were you want it..

(WRITTEN BY CURIOUZ 21 JULY 2012)

Take My Blinkie

Take My Blinkie

Terms of Use

Please download these from my blogsite only. Do not share the files in emails/groups/blogs etc. If you'd like to use them in a tag tutorial /group challenge - you can do that. But please direct others to my blogsite to download for themselves. And no linking to my download link itself - just the blogsite link, please. Personal use only please don't change any of the scraps or accents (Word art is ok to change color,size) Please do not change the file names or claim as your own, nor re-upload them to any file sharing sites. Thank you for downloading and have fun

I Ct For

My Licenses

Arthur Crowe - AC128


Barbara Jensen - BJ1551


Danny Lee - DL0014


Elias Chatzoudis - EAS11359


Gorjuss - SW2251


Keith Garvey - KG1057


Rachael Tallamy - 011066Curiouz


Roman Zaric - RZ083


The Hunter - APSS0144


Tony Tzanoukakis - TTZ115


TooshToosh - Toosh1365


Verymany - VMT_Curiouz


Xeracx - IRM015A


Zindy Zone - ZZT1089


Ami - AMICURIZ


Cilm - CI3927LM


Cdo - Cdo-2090


Dreamscape Imaging - DSI780


My psp tubes - MPT8644


Pics For Design - PFD_Curiouz


Pte - PTE0758


Satc - SATC0096


StickerChick - Stickerchick3120


The psp Project - TPP00144


Up Your Art - UpYourArt3406





Follow by Email

Translate

Contributors

Blog Friends

Popular Posts