28 September 2012

postheadericon Rebel Devil

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Verymany you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Sexy Little Devil" By Bibi you can find the kit HERE

Template 156 By Kristin HERE

Font used Arctik

Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Delete skulls,pixel words, circle,
Make left circle active and open paper 12 resize to 57% and paste as a new layer.
Make left glitter circle active and go to layers -new adjustment layer-
saturation-hue-lightness with these settings
Hue: 30
Saturation: 0
Lightness: -9

Make right circle active and open paper 12 again and resize to 57%
and paste as a new layer.
Make right glitter circle active and go to layers -new adjustment layer-
saturation-hue-lightness with these settings
Hue: 30
Saturation: 0
Lightness: -9


Make rectangle left active and open paper 4 and resize to 45% and paste as a new layer.
Make rectangle right active and open paper 4 and resize to 45% and paste as a new layer.
Make glitter rectangle active and go to layers -new adjustment layer-
saturation-hue-lightness with these settings
Hue: 30
Saturation: 46
Lightness: -4

Make wordart 2 active and open paper 4 and paste into selection.
Gradient 3 glow with light grey

Go to VanDer Lee - Unplugged x - Interlace with these settings:
1-50-50-1-0-50 Screen
Then gradient glow again 3 with light grey.

Open tube of chicue and paste as a new layer on top of star2 layer.

Go to xero-radience
With these settings:
13-112-225-181

Elements:
Open element 20 and paste it behind the tube into the rectangle layer, as amny times you want.
Open element 34 and paste behind the tube on to rectangle 2.
Open element 4 and paste as a new layer behind the tube.
Open element 46 and paste behind the tube.

Add copyright and signature and we are done=)
(WRITTEN BY CURIOUZ 28 SEPT 2012)

postheadericon I Only Look Innocent

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Danny Lee you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Emo Princess" By Toxic Desirez you can find the kit HERE

Template By JEK Creations HERE

Font used Andyfish

Plugins used EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Remove credit and R6 layers.

Make R11 active and open paper 6 and paste as a new layer.

Make R9 active and open paper 6 again and paste as a new layer.

Now make R5 active and open paper 8 and paste as a new layer.

Make R4 active and open paper 16 and paste as a new layer.

Make R3 active and open paper 16 again and paste as a new layer.

Make R2 active and open paper 9 and paste as a new layer.

Open tube of choice and paste it as a new layer.


Elements:

Open wire and paste it as a new layer on to R2

Open frame 2 and paste it as a new layer on to R2 over the wire.

Open chain 2 and resize to 52% and paste it right behind the tube.

Open divider and paste as a new layer on to R5 and duplicate and flip.

Open sparkles and paste as a new layer on to R1.

Add a new raster layer and move to bottom, open a paper from the kit and mask it with the mask of choice.

Now add copyright and signature and we are done=)


(WRITTEN BY CURIOUZ 27 SEPT 2012)

15 September 2012

postheadericon Little Boo

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Arthur Crowe you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Silly Monsters 2" By Toxic Desirez you can find the kit HERE

Template 185 By Kristin HERE

Font used Amal

Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Make top rectangle active and open paper 13 and paste as a new layer.

Make bottom rectangle active and open paper 13 and paste as a new layer.

Make top square active and open paper 12 and paste as a new layer.

Make bottom square active and open paper 12 and paste as a new layer.

Make black top rectangle active and open paper 14 and paste as a new layer.

Make black bottom rectangle active and open paper 14 and paste as a new layer.

Make circle active and open paper 6 and paste as a new layer.

Make rectangle active and open paper 20 and paste as a new layer.

Elements:

Open filmstrip and add a new raster layer and flood fill with white and
move to bottom.

Open tube and take 4 parts of the tube and paste into the filmstrip.

Merge all tube layers down and go to properties and choose luminance legacy
duplicate, choose soft light.

Go to the white layer and go to vanderlee - unplugged x - interlace

with these settings:

1-50-50-10-50
Normal

Then on both tube layers
go to xero- radience

With these settings:

128-50-128-255

Open wordart 1 and paste as a new layer on top of circle layer.

Open swirl 1 resize to 70% paste on top of bottom square layer
duplicate and mirror it.
duplicate again and flip and duplicate and mirror.

Open web resize to 63% and paste it on top of rectangle.
duplicate and mirror it, duplicate adn flip and duplicate and mirror.

Open sparkles and paste as a new layer on top of rectangle.

Open frame 4 and resize to 90% and paste as a new layer on top of
circle.

Open flame paste on top of rectangle duplicate and mirror it.

Open claws resize to 55% and paste on top of circle.

Open tube of choice and and paste as a new layer.

Add copyright and signature and we are done:)

(WRITTEN BY CURIOUZ 15 SEPT 2012)
13 September 2012

postheadericon Autumn Notes

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED
Tube of choice i am using the art of Arthur Crowe you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Autumn notes" By Bibi you can find the kit HERE

Template halloween templae 3 By Kristin HERE

Font used Amal

Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Make circle left active and open paper 1 and paste as a new layer.
Go to Xero-fritillary
with these settings:
5-30-10-0

Make circle right active and open paper 1 and paste as a new layer.
Go to Xero-fritillary
with these settings:
5-30-10-0

Make yellow rectangle active and go to
dbs flux - bright noise
with these settings:
intensity:38
Mix

Make orange rectangle active and open paper 1 again and paste as a new layer.
Go to VanDer Lee- Unplugged X- Interlace
With these settings:
Screen
1-50-50-1-0-50
Make glitter circle orange active
go to layers- new adjustment layer
hue/saturation/lightness
With these settings:
Master
hue: 23
Saturation:63
Lightness:31

Open up tube of choice and paste it were you want it.

Elements:

Open element 1 and paste behind tube.
duplicate and mirror it.

Open element 15 and paste on top of black circle.

Open element 20 and paste on top of orange rectangle, duplicate
and mirror it.

Open element 44 and paste behind tube.

Open element 52 resize to 48% and paste it behind the tube on orange rectangle layer.
duplicate and mirror it.

Open element 31 and paste it on top of circle layers duplicate flip and mirror it.

Open element 18 and paste it with the tubes waist.

Now add coyright and signature and we are done=)

(WRITTEN BY CURIOUZ 13 SEPT 2012)
11 September 2012

postheadericon Trick or treat

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Elias Chatzoudis you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Trick or treats" By Bibi you can find the kit HERE

Template Halloween template 7 By Kristin HERE

Font used Andyfish

Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Remove circle 1 layer,

Make circle right active and open paper 4 and paste as a new layer.
Then go to vanderlee-unplugged x- interlace
with these settings: 1-50-50-1-0-50

Make circle left active and open paper 4 and paste as a new layer.
Then go to vanderlee-unplugged x- interlace
with these settings: 1-50-50-1-0-50

Make left square active and choose a pink from paper 4 flood fill with it.
Then go to Xero- Fritillary
with these settings: 5-30-25-35

Make right square active choose a pink from paper 4 flood fill with it.
Then go to Xero- Fritillary
with these settings: 5-30-25-35

Make cirlce 2 active and choose a blue color from paper 4 and flood fill with it.
Make rectangle active and flood fill with purple color from paper 4
Then go to Xero- Fritillary
with these settings: 5-30-25-35

Now make pixel words layer active and make text black.
Then make dotted circle 2 active and make it black as well.

Open tube of choice and paste it as a new layer on to circle 2.

Elements:
Open element 7 and paste it as a new layer on dotted circle layer.
Open element 74 and paste on to both circle right and left.
Open element 11 and paste it on both sides of the tube.
Open element 26 and paste it of top of left and right squares.
Open element 6 resize to 77% and paste as a new layer on top of the tubes waist.
Open element 54 and paste as a new layer on top of rectangle.
Open element 70 and paste on to rectangle on both sides of the tube.
Open element 72 and paste it on top of rectangle and duplicate and mirror it.

Now add copyright and signature.
And we are done=)

(WRITTEN BY CURIOUZ 11 SEPT 2012)

01 September 2012

postheadericon Rock'N Roll

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of Arthur Crowe you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Music Is My Life" By Toxic Desirez you can find the kit HERE

Template 183 By Kristin HERE

Mask of choice

Font used Lino Chisel for word art
and Tangerine for signature

Plugins used Xero - dbs flux - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Make top rectangle active and open paper 14 and paste as a new layer.

Make bottom rectangle active and open paper 14 again and paste as a new layer.

Make the white top rectangle active and open paper 8 and paste as a new layer.
Make bottom white rectangle active and open paper 8 and paste as a new layer.

Make grey top rectangle active and open paper 10 and paste as a new layer.

Make grey bottom rectangle active and open paper 10 and paste as a new layer.

Make grey top square active and open paper 9 and paste as a new layer

Make bottom grey square active and open paper 9 and paste as a new layer.

Make dark grey top rectangle active and open paper 23 and paste as new layer.

Make dark grey bottom rectangle active and open paper 23 and paste as new layer

Make circle active and open paper 26 and paste as a new layer.

Elements:
Open star circle and paste as a new layer behind the circle.

Open frame 1 and paste as a new layer on top of circle layer.

open cd and paste as a new layer under frame.

Find a lyric you like and paste onto cd layer.

Open sparkles and paste as a new layer on to the cd layer.

OPen music note star resize to 50% paste were you want it.

Paste tube of choice as a new layer.

Now with the font of choice and size 48 write Rock'n Roll

Use gradient glow if you want to.

Then take the font of choice for signature and write name in over the

rock'n roll text.

Now go to background layer and flood fill with color of choice and add mask
of choice.

Add copyright and we are done=)

(WRITTEN BY CURIOUZ 1 SEPT 2012)

postheadericon I Make Big Boys Cry

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED

Tube of choice i am using the art of  Danny Lee you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Toxicity" By Toxic Desirez you can find the kit HERE

Template Emo misfits temp 2011 By Kristin HERE

Mask of choice

Font used WL Scribble Flinger

Plugins used Xero - dbs flux - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Delete word art layers.
Make purple rectangle 1 active and open paper 11 and
paste as a new layer.

Move up and make purple rectangle 2 active and open paper 11 again and paste as a new layer.

Make pink rectangle 1 active and open paper 7 and paste as a new layer.

Make pink rectangle 2 active and open paper 7 and paste as a new layer.

Move up to dotted rectangle 1 go to layers - new adjustment layer -
hue/saturation/lightness and mark "colorize" and press ok.

Move up to dotted rectangle 2 go to layers - new adjustment layer -
hue/saturation/lightness and mark "colorize" and press ok.

Now make rectangle active and open paper 21 and past as a new layer.

Make circle active and open paper 10 and past as a new layer.

Remember to drop shadow on the layers.
Open tube and paste as new layer.

Elements:
Open wire and paste as new layer on top of rectangle layer.

Open thorn border and resize to 40% paste on top of thin black rectangles

Now delete both thin black rectangle layers and add drop shadow.

Open up spider and paste it were you want it.

Now add a new raster layer and move to bottom.
flood fill with black and add mask of choice.


Add copyright,signature and wordart
And we are done=)


(WRITTEN BY CURIOUZ 01 SEPT 2012)

Take My Blinkie

Take My Blinkie

Terms of Use

Please download these from my blogsite only. Do not share the files in emails/groups/blogs etc. If you'd like to use them in a tag tutorial /group challenge - you can do that. But please direct others to my blogsite to download for themselves. And no linking to my download link itself - just the blogsite link, please. Personal use only please don't change any of the scraps or accents (Word art is ok to change color,size) Please do not change the file names or claim as your own, nor re-upload them to any file sharing sites. Thank you for downloading and have fun

I Ct For

My Licenses

Arthur Crowe - AC128


Barbara Jensen - BJ1551


Danny Lee - DL0014


Elias Chatzoudis - EAS11359


Gorjuss - SW2251


Keith Garvey - KG1057


Rachael Tallamy - 011066Curiouz


Roman Zaric - RZ083


The Hunter - APSS0144


Tony Tzanoukakis - TTZ115


TooshToosh - Toosh1365


Verymany - VMT_Curiouz


Xeracx - IRM015A


Zindy Zone - ZZT1089


Ami - AMICURIZ


Cilm - CI3927LM


Cdo - Cdo-2090


Dreamscape Imaging - DSI780


My psp tubes - MPT8644


Pics For Design - PFD_Curiouz


Pte - PTE0758


Satc - SATC0096


StickerChick - Stickerchick3120


The psp Project - TPP00144


Up Your Art - UpYourArt3406





Follow by Email

Translate

Contributors

Blog Friends

Popular Posts