22 October 2013

postheadericon I Must Feed

I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
 
 
*~Supplies Needed~*
Tube of choice i used the scary art of Xeracx you can get the tubes Here
Scrap kit used Pumpkin 2 by Kristin you can find her amazing kits Here
(This is a Satc Exclusive)
Template used template 233 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
VanDerLee-Unplugged X - Interlace
 
*~Font i used~*
Grave Digger
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Make raster 9 active and open paper 4 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Now make copy of raster 9 active and use paper 4 again and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 8 active and open paper 6 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make copy of raster 8 active and use paper 6 again and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 7 active and open paper 2 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make copy of raster 7 active and open paper 2 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to it as well with intensity 35 and ligther.
Make raster 6 active and open paper 9 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and mix.
Make copy of raster 6 active and open paper 9 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and mix.
Make raster 5 active and open paper 8 and paste as a new layer.
Add some gradient glow to it with a color from the scrap kit you use, width 3.00
Then add some bright noise to the paper and border as well with intensity 35 and lighter.
Now make the raster 5 layer active again and go to eyecandy4000 - fire and add some fire effect to the layer with these settings:
Direction: 90
Column Length : 150
Flame Width: 15
Movement: 33
Check denser flames
Duplicate the layer and flip.
Make copy of raster 3 active and invert the colors.
Make raster 3 active and add a new raster layer to it and flood fill with white.
Merge down.
Take some parts of your tube of choice and paste in to the raster 3 layer.
Duplicate and mirror. Then go to properties and add some lumincance legacy to it,
duplicate again and go to properties again and add some screen to it.
Then go to VanDerLee and add some interlace to it with the settings you prefer.
Now make copy of raster 2 layer active and invert the color on it.
Then move up to raster 2 and make it active and open paper 1 and paste as a new layer.
~*Elements*~
Open frame 3 and resize to 450 x 450 and paste as a new layer on top of the raster 2 layer.
Open web and duplicate and merge down, add some gradient glow to it in color you prefer and flip it,paste it as a new layer on top of copy of raster 3.
Open splatter and paste as a new layer behind your tag, duplicate and move around as you like.
Open lights and resize to 677 x 63 and paste on top of the web.
Open swirls and resize to 40% and paste into the frame duplicate and mirror.
Open your tube and paste it on top of your tag.
Open sparkles and paste as a new layer over the tube.
Open pumpkin 2 and paste it to the right down beside your tubes feet.
Add these words " I Bite You Bleed, You May Scream But I Must Feed"
 
Now add copy Right and tag name and we are done!
Written By Curiouz 22th Oct

0 comments:

Take My Blinkie

Take My Blinkie

Terms of Use

Please download these from my blogsite only. Do not share the files in emails/groups/blogs etc. If you'd like to use them in a tag tutorial /group challenge - you can do that. But please direct others to my blogsite to download for themselves. And no linking to my download link itself - just the blogsite link, please. Personal use only please don't change any of the scraps or accents (Word art is ok to change color,size) Please do not change the file names or claim as your own, nor re-upload them to any file sharing sites. Thank you for downloading and have fun

I Ct For

My Licenses

Arthur Crowe - AC128


Barbara Jensen - BJ1551


Danny Lee - DL0014


Elias Chatzoudis - EAS11359


Gorjuss - SW2251


Keith Garvey - KG1057


Rachael Tallamy - 011066Curiouz


Roman Zaric - RZ083


The Hunter - APSS0144


Tony Tzanoukakis - TTZ115


TooshToosh - Toosh1365


Verymany - VMT_Curiouz


Xeracx - IRM015A


Zindy Zone - ZZT1089


Ami - AMICURIZ


Cilm - CI3927LM


Cdo - Cdo-2090


Dreamscape Imaging - DSI780


My psp tubes - MPT8644


Pics For Design - PFD_Curiouz


Pte - PTE0758


Satc - SATC0096


StickerChick - Stickerchick3120


The psp Project - TPP00144


Up Your Art - UpYourArt3406





Follow by Email

Translate

Contributors

Blog Friends

Popular Posts