27 May 2012

postheadericon We All Scream For Icecream


I use paint shop 9 for my tutorials.
You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED!

Tube of choice im using art Alfadesire of you can find her art HERE
please dont use this tube without the proper license to do so.
Scrap kit used is "Sweet Moments" by Bibi you can find her kits HERE
Template by Pink Princess
Mask of choice 
Plugin used: Xero, Unplugged x, eyecandy4000

OK LET US START!

Ok open up the template shift +d to duplicate it close out the original. 
Go to layer 7 open paper 3 and paste as a new layer, then go to 
Then go to plugins - xero - fritillary
With these settings:  5 - 30 - 10 - 0
Go to layer raster 6 mark and open paper 3 paste as a new layer - invert - delte and merge.
Then go to plugins - xero - fritillary
With these settings:  8 - 30 - 83 - 78 
Then go to plugins - eyecandy4000 - gradient glow
With these settings:  Glow Width: 4.00  Soft Corners: 25  Overall Opacity: 100


Go to raster 2 open paper 3 and paste as new layer - invert -delete and merge. 
Then go to plugins - xero - fritillary
With these settings:  8 - 30 - 83 - 78 
Then go to plugins - eyecandy4000 - gradient glow
With these settings:  Glow Width: 4.00  Soft Corners: 25  Overall Opacity: 100

mark raster 4  open paper 3 and paste as a new layer,
Then go to plugins - xero - fritillary
With these settings:  8 - 30 - 83 - 78 
Then go to plugins - eyecandy4000 - gradient glow
With these settings:  Glow Width: 4.00  Soft Corners: 25  Overall Opacity: 100

Then go to the heart layers open paper 3 and add as a new layer.

Now open up your tube of choice and mark layer raste 3 and paste as a new layer.
Then right click the layer, go to properties and choose "Luminance legacy"
Then go to plugins - xero - radience 
With these settings:   36 - 9 - 60 - 241 
now open element 10  make it purple and paste it on top of layer raster 1.
duplicate and mirror it.

Then open element  21 paste it as a new layer on layer raste 7 and duplicate and mirror it and duplicate and flip it and duplicate and mirror it again.

open element 41 and paste on top of layer 2 and duplicate and mirror it.
opne element 40 and paste it into the heart duplicate and mirror it so it goes directly into both hearts.

then you hide the hearts if that looks better for you.

open element  36 and paste as a new layer on top of all layers.

open element 35 resize to  50% paste also on top of all layers.

open element 23 and paste it on layer raster 1 as a new layer.

Open the tube of choice and paste it to the left in the frame.

Add word art, copyright and name and we are done :)


(WRITTEN BY CURIOUZ 27 MAY 2012)

26 May 2012

postheadericon Wish Upon A Star


I use paint shop 9 for my tutorials.
You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED!

Tube of choice im using art of Gemini Creationz you can find her art HERE
please dont use this tube without the proper license to do so.
Scrap kit used is the gorjuss new kit from Bibi "Fly Me To The Moon" you can find her kits HERE
Template by Slow
Mask of choice 

Ok open up the template shift +d to duplicate it close out the original. 
Resize template to 700 X 700 

Strat up with layer 2 and open paper 3 and resize 50%  and paste as new layer, do the same to layer 4.
Then go to layer 3 and open paper 6 and paste as new layer. 
do the same to layer 5.

Now go to layer 6 and open paper 10 and paste as a new layer.
Move up to layer 7 and mark it and flood fill with white color.

then open up the tube of choice and paste it were you want in the layer 7.

open element 10 and resize to 54% and paste it were you want it on top of layer 5 duplicat it a few times and place it were you want.

open element 11 and paste it in the corner of layer 7 as a new layer.

open element 12 resize to 59%  and paste it near the flowers on layer 7 
open element 15 and paste it on top of layer 3 duplicate and mirror it and flip it and move the duplicated one up to layer 5.

go to effect - plugins - eyecandy4000 - gradient glow with white color

With these settings:  Glow Width: 11.00    Soft Corners: 25  
Overall Opacity: 100

open elements 18 and paste as a new layer on top of layer 7.

open element 21 resize to 60% and paste it into the layer 7 frame 

open element 22 resize 70% and go to the bottom layer  and paste as new layer.
duplicate and mirror, duplicate and flip, duplicate and mirror.

open element 24 paste on top of layer 5 duplicate and move it under the frame as well.

open element 27 and paste were you want on top of layer 5.

open element 38 resize to 40% and paste on top of layer 7 in the corner.

then duplicate and paste in the bottom left corner as well.
open element 45 and paste it on top of layer 7 behind the tube.

Now add the tube of choice and copyright and name and we are done=)

(WRITTEN BY CURIOUZ 26 MAY 2012)

postheadericon Simply Beautiful


I use paint shop 9 for my tutorials.
You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED!

Tube of choice im using the fabby work of Danny Lee, please dont use this tube without the proper license to do so you can find his artwork HERE
Scrap kit used "Gold Rush" by Vaybs you can find it HERE
Template "simply beautiful" by Brutal Designs you can find her templates HERE
Mask of choice 
Plugins/Filters: Unlugged x - eyecandy4000 
Fonts: pixelette & Saginaw Light

Ok open up the template shift +d to duplicate it close out the original.
go to grey circle bottom and open paper 9 and go to layer - new adjustment layer- hue/saturation/lightness - yellow
with these settings :  hue: 13   saturation: 0  Lightness: 28
then mark the circle bottom layer and add paper as a new layer - invert and delete.

then go to effects- plugins - VanDer Lee - Unplugged X - Interlace
With these settings:  1 - 54 - 1 - 1 - 7 - 13 Transparency: 0  Normal
Then go to blk square top mark with your magic wand tool and open paper 20
add as a new layer-invert and delete.  do the same to blk square bottom.
then go to layer grey circle top and mark with your mwt and add the face from the tube.
then right click on the tube layer and go to properties and choose luminance legacy.
then duplicate the face tube layer and go to plugins - VanDer Lee - Uplugged x - Interlace 
with these settings:  1 - 54 - 1 - 1 - 7 - 13 Transparency: 0  Normal
then merge down.
now move up to white circle frame and mark and open paper 9
paste it as a new layer- invert and delete.
View only grey square top, blk square middle and grey square bottom and mark all with your magic wand tool.
flood fill the squares with a light grey color.
then you take the closeup tube resize it and paste it as a new layer and use your moving tool to get it were you want it, press invert and delete and merge down.
then right click on the tube layer and go to properties and choose luminance legacy.
then duplicate the face tube layer and go to plugins - VanDer Lee - Uplugged x - Interlace 
with these settings:  1 - 54 - 1 - 1 - 7 - 13 Transparency: 0  Normal
then mark blk square top, blk square middle and blk square bottom 
then open paper 9 again and paste as a new layer- invert and delete and merge.
Then go to plugins- eyecandy400- gradient glow and choose a light grey color to make the frames "pop" more glow width 3.00
Open element 22 and go to  layer - new adjustment layer- hue/saturation/lightness - yellow
with these settings :  hue: 13   saturation: 0  Lightness: 28
paste it at the background layer,  duplicate and flip it and move it around as you like. set the opacity on the layer to 52.

Go to the beautiful layer and steal a yellow goldish color from the tube and go to plugins - eyecandy4000 - gradient glow
With these settings:  Glow Width: 9.00   Soft Corners: 25  
Overall Opacity: 100

Do the same to layer simply.

Now add the tube as a new layer.

open element 18 and paste it on top of layer blk square top.
open element 33 resize to 50% and go to  layer - new adjustment layer- hue/saturation/lightness - yellow
with these settings :  hue: 13   saturation: 0  Lightness: 28
paste it on top of blk square bottom layer set opacity on layer to 70

den flip it and move it up to blk square top layer 

Add copyright and name and you are done!

(WRITTEN BY CURIOUZ 26 MAY 2012)

24 May 2012

postheadericon I Kissed A Girl

I use paint shop 9 for my tutorials.
You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!



TOOLS NEEDED!

Tube of choice im using the exclusive tube of Zlata M
 (please dont use this tube without the proper license to do so.)
Scrap Kit  "SweetKisses"  by  Bibi you can find  HERE
Template by Deb & Kristin collab 2011 template 2
Mask of choice
Plugins used: eyecandy4000 , Xero, Dbs Flux, Unplugged X.
Font used: Pixelette for the copyright and the black bloc for signature.

LET US START!


Open up the template shift +d to duplicate it close out the original.
Delete "heart" layer and "raster 2 " layer.
 Start with "black right rectangle" mark with your magic wand tool, open paper 8 resize to 60% and paste as new layer use your moving tool to get it were you want - invert and delete and merge down.
Now go to plugins - Unplugged x - TV RGB

With these settings: -Normal - Trancparency : 0

Then move to "black left rectangle" mark with your magic wand tool, open paper 8 resize to 60% and paste as new layer use your moving tool to get it were you want  - invert and delete and merge down.
Now go to plugins - Unplugged x - TV RGB

With these settings: -Normal - Trancparency : 0

Then you go to layer " grey left circle"  mark it with your mwt and open paper 9 resize to 60% and paste as new layer - invert and delete and merge down.
Then go to plugins - xero - artworks

With these settings:  
Wedges 
57- 34- 8- 192- 6 - 1 - 15- 20-
220-255

Do the same as above to "grey right circle"

Move up to "teal left circle" and open paper 1 mark it with your mwt and open paper 9 resize to 60% and paste as new layer - invert and delete and merge down.
Then go to plugins - xero - artworks

With these settings:  
Wedges 
57- 34- 8- 192- 6 - 1 - 15- 20-
220-255

Do the same as above to "teal right circle"

Now go to layer " pink left rectangle"  mark it with your mwt and open paper 8 resize to 60% and paste as new layer - invert and delete and merge down.
 to plugins - Unplugged x - TV RGB

With these settings: -Normal - Trancparency : 0

do the same to "pink right rectangle"
No go to "oval"  and mark it and flood fill with black.
Then you mark the layer "oval" open up your close up tube and paste it as a new layer.
Then go to plugins - xero - radience

With these settings:  26 - 1 - 57 - 244

Then you go back to the oval layer, duplicate it and have the duplicated layer marked and choose a color from the kit and go to plugins - dbs flux - spider web  

With these settings: 25 - 44 - 39
then set the colored duplicated layer opacity to 44
and the oval layer to opacity 64

 to layer "copy of raster" and mark it and add a new raster layer choose another color from the kit and flood fill it.
then go to plugins -  dbs flux - spider web  

With these settings: 25 - 44 - 39
 set the opacity of the duplicated colored layer 52 
and the "copy of rater" 62

"do the same to the "raster 3"

Then to layers "copy of vector" and copy (2) of vector" flood fill with black.
then set the opacity to 60 on layers "copy of vector" and copy (2) of vector"
Now open element 69  resize to 53%  and paste as a new layer on "pink left rectangle" layer.
then open element 70 and resize to 53% and paste as a new layer on "pink left rectangle" layer then flip it.
Open element 104 and paste it as a new selection under oval layer.
then open element 11 and paste as a new layer behind the close up, then open element 13 and do the same and flip it.

Then open element 2 and paste it behind the tube little bit higher so it shows on the outside, duplicate and mirror it.
Now go to the bottom layer and open element 21 and paste it as you like.

Open element 87 and paste it on top of closeup layer on the bottom of the frame.
Then open element 57 and resize it to 40% and paste it were you want it.

Open element 31 and resize to 78% and paste it were you like it.
Add the tube you have choosen were you want it.
Then add name and copyright and we are done :o)


I hope you enjoyed my tutorial!
(WRITTEN BY CURIOUZ 23 MAY 2012)

postheadericon My Way Or No Way


I use paint shop 9 for my tutorials.
You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!

First of all i would like to give a biiiiig thanks to Bibi for making this kit for me
i am totally in love with it <3 THANK YOU!

TOOLS NEEDED!

Tube of choice im using the fabby work of The Hunter
(please dont use this tube without the proper license to do so)
Scrap kit  with bright colors from my friend Bibi you can find it HERE 
Template by Addictive Pleasures (template27)
Plugins: Unplugged x 
Font used: Pixelette for copyright & Gabriel Weiss Friends  for signature.


OK LET US START!

Open up the template shift +d to duplicate it close out the original. 
Go to layer "rectangle" mark and open paper3 and add as a new layer,
Now move down to the layer "circle" mark with your mwt and open paper6 and paste as a new layer.
Then go to effects - plugins - VanDer Lee - Unplugged X - Interlace

With these settings:  1 - 50 - 50 6 - 95 - 50 - Screen

Now go to layer "word art"  then we need to change color to fit the kit so go to layers - new adjustment layer - hue/saturation/lightness 

with these settings:  hue: 87  saturation: 100  lightness: 0 

Now go to the layer "stars"  and do the same as "wordart" layer

with thtese settings:  hue: 87  saturation: 100  lightness: 0 
ese se
Then go to "smallstars" layer and again the same 

with these settings:  hue: 87  saturation: 100  lightness: 0 

And at last to the "text" layer as well 

with these settings:  hue: 87  saturation: 100  lightness: 0 

Now open up the close up for the tube you have choosen and add as a new layer on top of "circle" layer"  invert and delete. Now duplicate the close up layer and close of the duplicated one. 
Then mark the other closeup layer and go to adjust - blur- gaussian blur 
with this settings: 2,00

Then right click on the layer and choose properties - luminance legacy.

Mark the duplicated close up layer and go to properties then choose screen.

Now you co to layer "circle" mark, and paste the tube as a new layer, duplicate it and use your mwt to remove and correct so it looks nice inside the circle.
Now you open element 22 and paste it as you want on top of "rectangle" layer.
Open element 8 and paste it on top were you want it.
Now open element 39 and paste it as a new layer behind the tube.
Open element 31 and paste it on top of circle layer, and tube layer.
open element 41 and paste it were you want it.
open element 14 and paste it on top of circle layer under the closeup layer and make the close up layer opacity to 36.
open element 1 resize to 50% and paste it were you want it. 
open element 12 and paste it in the left corner of the circle 
open element 9 resize 50% flip it, and paste under the element 12

Now add a new raster layer and arrange and move to bottom, then you open element 46 and paste as a new selection on the new raster layer
make it fit the tag and look like a mask effect.
Now Add the copyright and name and your done!


I hope you enjoyed my tutorial 
(WRITTEN BY CURIOUZ 21 MAY 2012)



postheadericon Scralet


Made some extras from the Amore kit you can find it HERE




postheadericon My Way


I used the beautiful kit "Curiouz" from Bibi you can find
it HERE

Thank you for this gorjuss kit Bibi hun <3




postheadericon Bad Azz


I use paint shop 9 for my tutorials.

You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!


TOOLS NEEDED!

Tube of choice im using the exclusive tube of  Zebrush,
 please dont use this tube without the proper license to do so.

The Gorjuss kit "BadAzz" from my friend Bibi you can  find it HERE
Template from Misfits Collabs April & Mzdixi 
Mask of choice
Filter used :  xero - fritillary 


LET US START!

Open up the  template shift +d to duplicate it close out the original
delete these layers on the template before we go any further: crinfo, filmstrip,flimstrip background, rightblckretangle, leftblckretangle, centercircle, Blackoutline...
Ok then you go to layer bigcircle and "view current olny"  now you open up
paper 1 (blue and black with writing on)  shift +d to duplicate it close out the original resize to 600 x 600
paste as new layer, invert and delete.

now go to layer rightbaclbg and floodfill with a color to fit your kit and tube i used blue, do the same to leftblaclbg.
then go to effects - plugins - xero - fritillary

with these settings:   4 - 33- 32- 39

Now go to leftrectangle and flood fill with black, do the same to rightrectangle..
then go to effects - plugins - xero - fritillary

with these settings:   4 - 33- 32- 39


Now go to layer innersquare and use your magic wand tool to only mark the border of that layer and flood fill it same blue or color u used on rightbaclbg..
then go to effects - plugins - xero - fritillary

with these settings:   4 - 33- 32- 39

The inside of the innersquare layer flood fill with black.
Open up the tube of choice and paste it were you want it into the innersquare layer, use your moving tool to get it as you want..
duplicate the tube layer and close of the dulpicated one,  and go to adjust - blur - gaussian blur

with these settings:  2,00

now you right click on the raste layer and go to properties and choose
Luminance lagacy.

Open up the duplicated tube layer and go to properties and choose luminance..
Then you go to effects - plugins -   VanDer Lee - Unplugged X - Inerlace

With these settings:   1- 50 - 50 - 1 - 0 - 50 - Normal

Now you find a lyric or word art you want and write/paste it beside the tube in the  innersquare  layer.

Now open element 95 and resize to 50% and paste on top of leftrectangle
duplicate and flip, do the same on the rightrectangle.

open element 86 resize 50% and paste it on the bottom of the lyrics.

used gradient glow on it with a blue color 

with these settings:

Glow width: 3.00 -  Soft Corners: 25  Opacity: 92

open element 76  and paste it on top of bigcircle  were you want it to be.

open element 66 and paste it on top of the tag were you want it.

open element 53 resize to 53% and paste it on top of all layers.

open element 42 and resize to 50% and paste it back innersquare-
duplicate it and decorate around the frame..

open up element 94  resize to 30% and paste it were you want it..

Now add copyright and name.

I Hope you enjoyed my tutorial!

(WRITTEN BY CURIOUZ 19 MAY 2012)


postheadericon Very Important Princess

I use paint shop 9 for my tutorials.

You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED!

Tube of choice i used the gorjuss art of Zlata M
Template by KRISTIN
Scrap kit i used is the colorful kit "Emo Princess" of Bibi you can find it HERE
Mask of choice
Font used:  Aerofoil, pixelette.
Plugins i used:  Eyecandy4000 &  Unplugged X


OK LET US START!


Open up template shift+d and close the original
open up a new canvas 600 x 600 and floodfill with a color from the kit i used black,
mark layer "raster1" and paste the finished product of your mask on to there.

Now go to "Purple Rectangle 1"  mark and open paper 5 add as new layer - invert and delete and merge down.
Now go to "Purple Rectangle 2" and repeat the step you did before: mark and open paper 5 add as new layer - invert and delete and merge down.

Next go to pink rectangle 1 and mark and open paper 11 add as new layer - invert and delete and merge down.
 now go to pink rectangle 2 and do the same : add as new layer - invert and delete and merge down.

Now go to the layer Rectangle open paper 11  add as new layer - invert and delete and merge down.
Both layers Dotted Rectangle 1 and 2 make them light grey..

Go to the rectangle layer and open paper 2 and paste as new layer invert and merge down.
now go to effects - plugins - vander lee - unplugged x - interlace

with these settings:
 1 - 50 - 50 - 1- 0 - 50- transparency: 0  Normal

Now go to layer "glitter circle" and make it blue to fit the kit.

Move down to circle and mark it add a new raster layer and floodfill with white.
merge down and mark again and open up close up tube of choice and paste as a new layer use your moving tool to get it as you want.
and invert and delete and duplicate. close the duplicated layer and go to adjust -blur and gaussian blur 

with these settings: 2,00

then go to properties and chooce luminance legacy.
now open the duplicated layer and go to properties and set thescreen opacity to: 90

Go to effects - plugins - vander lee - unplugged x - interlace
with these settings: 
1 - 50 - 50 - 1- 0 - 50- transparency: 0  Screen

Delete the word art layers.
Delete both think black rectangle layers.

open up element 10 and go to layer rectangle and paste as new layer -duplicate and mirror
open up element 11 and go to layer rectangle and paste as new layer - duplicate and mirror

open element 14 and paste it as a new selection behind the big circle duplicate and  flip.

open element 26 resize to 70%  and paste it behind the circle on borth side of it.
open element 55  resize to 77% i paste it in evey corner of the back of the tag.

open element 60 resize to 60%  and past on to as new selection on  rectangle layer  on both sides so duplicate and mirror. duplicate again and flip and again and mirror.

open element 61 paste on glitter circle layer duplicate and mirror and merge down and go to effects- plugins - eyecandy4000 - gradient glow  color white 

with these settings :
glow width: 7.00    Soft corners: 25       Overall opacity: 94        

now paste the tube were you want  it  now add your word art of choice, copyright and name and we are done!

I hope you enjoyed my tutorial:o)

(WRITTEN BY CURIOUZ 12 MAY 2012)

postheadericon Admit it


I use paint shop 9 for my tutorials.

You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!


TOOLS NEEDED!

Tube of choice i use this gorjuss art of Arthur Crowe
Template by CRAZYCAKES
Scrap kit i used is "Lonely Night" of Bibi you can find it HERE
Mask of choice
Fonts:  914-solid,  adamshand , pixellette, 
Plugins: dbs flux, Vander Lee- Unplugged X ,  eyecandy4000,

OK LET US START!

Open up template hit shift+d and close the original
Go to layer backcircle and make it blue or purple to fit tube/kit then go to effects - plugins- dbs flux - bright noise settings 20 and mixed
Mark layer "circle" and open up paper 5 and paste as new layer invert and delete.
effects-plugins-VanDer Lee -unplugged x - interlace 

With these settings:
  1 - 50 - 50 - 1 - 0 - 50   transparency: 0  Normal

Now go to layer "back rectangle" and make it purple to fit the kit.
Go to layer "rectangle" open up the close up of the tube you would like to use and paste as new layer, use your moving tool and move it were you want it, duplicate and hide the duplicated layer.
Go to adjust -blur-gaussian blur

With these settings: 2,00

then go to properties and choose luminance legacy
now open the duplicated layer go to properties - soft light and merge down..

Now go to layer "small rectangle" make it purple or blue to fit the tube/kit

Now go to border layer make it purple or blue to fit the tube/kit
Same with dot layer 

Now go back to  small rectangle effects-plugins-VanDer Lee -unplugged x - interlace 

With these settings:
 1 - 50 - 50 - 1 - 0 - 50   transparency: 0  Normal

now open up a new canvas 700 x 700 and use front color from tube or kit no back color
do the same again with black color and mirror mask before pasting it.
then open up mask of choice, when done paste as new layer on top of tag and arrange and move to bottom.

Now open up your tube of choice and paste it were you want it.

I did not use original font and word art but you can if you like:) 

Now open element 13 resize to 50% and go to circle layer and paste  as you like it, 
open element 14 and go to small rectangle and paste it as you like.

open element 22 and paste it to the left on the frame, duplicate and mirror it.

open element 34 resize to 50%  go to top frame layer and paste it in the corner over the close up face.
open element 47 and paste it on the layer line were you want it.

open element 50 and paste them to the right on top layer frame, go to effect-plugins-eyecandy 4000 and use gradient glow

With these settings:

 White

Glow Width: 9,00

Soft Corners: 25

 Opacity: 86

open element 62 resize to 60%  and go tol layer rectangle and paste were you want it..

open element 65 resize to 70% and go to layer rectangle and duplicat it mirror it and move it down to under rectangle.

open up element 9 and paste it below rectangle layer on the bottom of the tag
duplicate it and mirror it. Then delete the overflood thats look funny with your freehand tool.

Now add copyright and name and you are done :o)
Hope you enjoyed my tutorial.

(WRITTEN BY CURIOUZ 11 MAY 2012)

postheadericon Rebel Rocker

I use paint shop 9 for my tutorials.

You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!


TOOLS NEEDED!

Tube of choice i used the great art of  The Hunter
Template 156 by KRISTIN
Scrap kit "Black Currant" of Bibi you can find the kit HERE
Filter/Plugin used:  Xero,  Dbs flux , Eyecandy 4000.


OK LET US START!

Open up template shift +d to duplicate it close out the original.
view only "left circle" use your magic wand tool and mark it and open paper 3 and place as a new layer invert and press delete.

open layer left glitter circle and make it black.
 open right circle and mark and use paper 3 again

do the same to layer "right glitter circle" as the left.

now open the layer circle and mark and open paper 5 and make it black and grey
paste as new layer invert and delete.

go to rectangle left mark and open paper 5 paste as new layer, invert and delete.
go to effect - plugins - xero - fritillary 

With these settings:
5 - 27 - 100 - 60

go to rectangle right mark and open paper 5 paste as new layer, invert and delete.
go to effect - plugins - xero - fritillary 

With these settings:
5 - 27 - 100 - 60

Now go to glitter rectangle make it grey

go to layer rectangle 2 and mark paste your close up of chocie as new layer duplicate invert and delete, now go to the top layer you duplicated and use your freehand selection tool and remove the overflood that is outside the frame from her chest and down keep the head outside the frame.

now go to the pixel word layer and delete

go to word art2 layer and make it black and go to effects-plugins- dbs flux- bright noise - lighter
and then you go to  effects-plugins and use eyecandy 4000- gradient glow black

now open up element 107 paste as new layer on top of rectangle 2

open element  127 and paste as new layer on sm stars 2 and use your moving tool to move it behind the big rebel text.

open element 126 and paste as new selection on left circle layer and promote to layer
do the same to right circle.

now use gradient glow matching the red in the tag.

open element 76 and paste is as a new layer on rectangle 2

paste your tube were you want it

Now add your copyright and name and your done *:o)

(WRITTEN BY CURIOUZ 8 MAY 2012)



postheadericon Lil Red Riding Hood


I use paint shop 9 for my tutorials.

You should know your way around in paint shop to use this tutorial.

THIS IS WHAT WE ARE GOING TO MAKE!


TOOLS NEEDED!

Tube of choice i am using the fabby work of Arthur Crowe 
Scrap kit "Dark Symphony"  from my friend Bibi can be found HERE
Template  161 by KRISTIN
Font of choice
Plugins/Filter used :  Eyecandy4000 


OK LET US START!

Open up the template shift +d to duplicate it close  the original.  

delete skull layer and pixel word layer 

View only "star background" go to layers new adjustment layer and choose
hue/saturation/lightness 
hue -100
saturation -100
in other words make it deep black and merge down.

open up "left circle" and use your wand tool to mark it and open up
paper 4 from the kit and paste as new layer and invert and delete and merge down.

next open "right circle" and use your wand tool to mark it and open up
paper 5 from the kit and paste as new layer -invert and merge.

now open up the "rectangle" use your wand tool again to mark it make it black, and open up element 80 (blood splat) and paste as new layer and duplicate and use your moving tool to get it as you want   - invert and delete and merge down.
Now go to "glitter oval" layers- new adjustment layer and hue/saturation/lightness 

With these settings:  
hue: 30   saturation: 100   lightness:0
merge down..

Now go to the ovel layer and use your magic wand and mark 
open up paper 5 and paste as new layer -invert and delete and merge.
go to effects - plugins - VanDer Lee unplugged x - interlace

With these settings :
 1-85-24-43-0-50 Normal

Now go to "right glitter rectangle" and layers- new adjustment layer and hue/saturation/lightness with these settings  
hue: 0   saturation: -100   lightness: 46
do the same with same settings for "left glitter rectangle" and merge down.

Now go to right rectangle mark and use element 80 again (blood splat) 
paste as new layer use your moving tool to get it as you want and invert and delete and merge
 do this again with left rectangle.

Now go to gliter circle mark with your magic wand and go to layers
new adjustment layer and hue/saturation/lightness with these settings  
hue: 0   saturation: -100   lightness: 46

Now go to circle1 mark with you magic wand tool  go to layers- new adjustment layer and hue/saturation/lightness with these settings  
hue: 0   saturation: 0   lightness: -100

Now mark circle2 with your wand tool and take the close up of tube you used and paste as a new layer
use your moving tool to get it were you want and invert and delete

duplicate the close up layer

mark the orginal layer and go to adjust - blur-gaussian blur 
with these settings Radius: 2,00
now go to properties and choose - luminance legacy 
mark the duplicated layer and go to properties - screen

open up element 78 (wire)  resize to 70% andpaste as new layer on top of
oval layer.

 open up element 2 (butterfly) and mark circle2 and paste as a new layer on top of there. duplicate and mirror merge down. 

mark left rectangle layer and  open up element 32 (black rose) 
resize to 70% and paste as new layer, duplicate and mirror.
merge down and go to effects - plugins - eyecandy 4000 - gradient glow
color dark red.
With these settings :   
 glow width:  5.00    

soft corners : 25  

overall opacity: 79

Go to top layer and open up element  57 (spider) resize to 60%
paste were you want it and go to effects  - plugins - eyecandy 4000 - gradient glow
color dark red.

With these settings :    
glow width:  5.00 

soft corners : 25  

overall opacity: 79

go to layer circle1 open up element 73 (white heart trail) 
and paste as a new layer, duplicate, mirror and merge down.

go to layer left rectangle and open up element 79 (wire) and paste as new selection as you want and promote to layer and do wat you like.

Now go to circle2 and effects - plugins- dbs flux -  spider web

With these settings :   
Rays: 29   

Rings: 44     

Merge: 27

Set opacity on layer to 78.

Now add the main tube were you want it, copyright and font of choice.

I hope you enjoyed my tutorial (^^,)
(WRITTEN BY CURIOUZ 4 MAY 2012)

postheadericon Scarlet Shoes

THIS IS WHAT WE ARE GOING TO MAKE!

I use paint shop 9 for my tutorials.

You should know your way around in paint shop to use this tutorial.


TOOLS NEEDED!

Template 5 by Tracey you can find it HERE

Tube of chocie, i used "Scarlet Shoes" by Zlata M you can find it HERE

Scrap Kit i used is "Amore" by Bibi  you can find it HERE

Fonts i used  Saginaw &  Pixelette


Plugins used  

VanDerLee - Unplugged X - Interlace

Eyecandy 4000 - Gradient Glow

OK LET US START!

Open up the template in psp, then hit SHIFT+ D to duplicate
and close the original..

Then you delete the © on the template

and delete the text and text fill layers as well.

and at last delete square 3, square fill 3, square 2, square fill 2 and square 1

then you should only have the layers left that we are going to use...

Now move down to the layer called "rectangle 1" and view only that one

choose your magic wand tool and press right outside the rectangle,

then open up "papers 5" and paste as a new layer

make sure you go the right settings then press CTRL + X

Now you should have filled the rectangle with the paper.

now you go to Effects - Plugins - VanDerLee - Unplugged X vs.2 - Interlace

With these settings:

1 - 50 - 50 - 1 - 0 - 50 

Transparency - 0 Normal

Then you go to the  layer called " rectangle" 
and choose your magic want tool again and press right outside the rectangle.
add a new raster layer and floodfill with color of choice i used white.

Open up the close up of the tube you want to use, resize and paste it as a new layer
then use your moving tool to put inside the "rectangle" 

Duplicate the close up layer and close off the duplicated one.

the go to Adjust - Blur - Gausian Blur - Radius 3,0

And then go to Properties - Luminance Legacy 

Now go to the duplicated close up layer and choose properties

With these settings:

Properties - Screen

Opacity: 85

Open element 19 "the light pink glass heart"
 Resize to 50%

mark the "rectangle 1" layer and paste the heart on the middle of  side of the
corner duplicate and mirror, 

Then you open element 13 "the bee mine heart"
resize and paste it in top of the glass hearts.

Now we are almost done (^^,)


Mark the last heart layers and use eyecandy 4000 - Gradient glow


With these settings:

Glow Width:  5.00

Soft Corners: 25

Overall Opacity: 100

Now take your tube of choice and place it were you want it and add
© and name and word art of choice to it

Open up your "saginaw" font or font of choice and write
"Beauty is in the eye of the beholder" or whatever you like to write

I hope you enjoyed my tutorial
(WRITTEN BY CURIOUZ  7 APRIL 2012)
18 May 2012

postheadericon Smokey Rocker



I am proud to say i am a part of Danny Lee's creative 
team, he has a lot of great art


I used the gorjuss art of Danny Lee 
you can check out his art in his store here

Take My Blinkie

Take My Blinkie

Terms of Use

Please download these from my blogsite only. Do not share the files in emails/groups/blogs etc. If you'd like to use them in a tag tutorial /group challenge - you can do that. But please direct others to my blogsite to download for themselves. And no linking to my download link itself - just the blogsite link, please. Personal use only please don't change any of the scraps or accents (Word art is ok to change color,size) Please do not change the file names or claim as your own, nor re-upload them to any file sharing sites. Thank you for downloading and have fun

I Ct For

My Licenses

Arthur Crowe - AC128


Barbara Jensen - BJ1551


Danny Lee - DL0014


Elias Chatzoudis - EAS11359


Gorjuss - SW2251


Keith Garvey - KG1057


Rachael Tallamy - 011066Curiouz


Roman Zaric - RZ083


The Hunter - APSS0144


Tony Tzanoukakis - TTZ115


TooshToosh - Toosh1365


Verymany - VMT_Curiouz


Xeracx - IRM015A


Zindy Zone - ZZT1089


Ami - AMICURIZ


Cilm - CI3927LM


Cdo - Cdo-2090


Dreamscape Imaging - DSI780


My psp tubes - MPT8644


Pics For Design - PFD_Curiouz


Pte - PTE0758


Satc - SATC0096


StickerChick - Stickerchick3120


The psp Project - TPP00144


Up Your Art - UpYourArt3406





Translate

Contributors

Blog Friends

Popular Posts