28 September 2013

postheadericon Good Vs Evil

I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
 
 
*~Supplies Needed~*
Tube of choice i used the gorjuss art of  Verymany you can get the tubes Here
Scrap kit used Devilish by Bibi Collection you can find her amazing kits Here
Template used template 57 by Pooker, you can download it on her blog Here
 
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
 
*~Font i used~*
1001head
 
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Delete layer dottedrect & Dottedcircle & Redbits.
 
Make black rectangle layer active and open paper 2 and paste as a new layer,invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Then make black rectangle layer active again and add some bright noise to it
with settings: Intensity: 42 Darker
 
Make Dkgrayrect active and open paper 8 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
 
Make pink circle layer acitve and open paper 9 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Then makepink circle layer active again and add some bright noise to it
with settings: Intensity: 42 Darker
 
Make Redrect activeand open paper 9 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Then makepink circle layer active again and add some bright noise to it
with settings: Intensity: 42 Darker
 
Make pink rects active and open paper 6 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
 
Make white circle active and open paper 1 and paste as a new layer, invert and delete.
Add some white/black gradient glow to it with 3.00 as width.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Merge down layers aroow 1 & 2 and add some bright noise to them
with settings: Intensity: 42 Darker
Add some white/black gradient glow to it with 3.00 as width.
 
Make the left square active and add a new raster layer to it, flood fill with colors of choice
and merge down.
Do this to right square as well.
 
Now make the word art layer active and flood fill "GOOD" White and the "S" in Vs.
Then flood fill the "EVIL" Black and the "V" in Vs.
Now add some gradient glow to it in Dark Red
Add some bright noise to it as well with same settings as before.
 
~*Elements*~
Open element 76 and 72 and resize both to 241 x 241, paste the black circle frame on top of the red one, then duplicate it and take them and post over the layers right square and left square to
make frames.
Then open the tubes you wanted to use and resize to fit into the frames, duplicate and delete access. Do this to both right and left square layer.
Go to the right and left square layer and delete left over parts that sticks outside the frames
use your selection tool.
Then add some bright noise to the gradient glow with settings: Intensity: 42 Darker
Open element 8 & 9 and resize them to 241 x 241
And paste them were you lie them.
Open element 75 and paste it as a new layer on top of Blackrect.
Make white cirlce active and open element 69 and paste into selection.
Duplicate and flip.
Open element 43 and paste as a new layer on top of left square.
Open element 15 and paste it on top of right square.
Open element 53 and paste on top of layer pinkrects.
Open element 57 resize to 57% and paste behind your tag.
 
Add copyright, tagname and we are done!
 
Written 28 Sep 2013 By Curiouz

27 September 2013

postheadericon W.I.T.C.H

I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
 
 
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Celine Art you can get the tubes Here
Scrap kit used Witchy by Bibi Collection you can find her amazing kits Here
Template used template 121 by Millie, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Fritillary
 
*~Font i used~*
Forelle
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Make layer 1 active and add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 2 active and add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 3 active and add a new raster layer, flood fill with a purple color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 4 active and add a new raster layer, flood fill with a purple color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 5 acitve and add a new raster layer, flood fill with a black color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 6 acitve and add a new raster layer, flood fill with a black color.
add fritillary to it by using your Xero filter.
With these settings: 4 - 30 - 20 - 31
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Make layer 7 active and open paper 1 (moon) add as a new layer, invert and delete.
make the layer 7 active again,invert and delete.
Add some gradient glow to it with a 50/50 white and dark purple color 3.00 width.
Add bright noise to it intensity: 45 Mix
Open tube of choice and add as a new layer.
Open element 33 and paste as a new layer on top of layer 7 duplicate and mirror.
Open element 8 and paste on top of layer 5 duplicate and mirror.
Open element 41 resize to 85% and change the color on the frame to black or purple.
Paste it as a new layer.
Open element 56 and paste as a new layer were you want it.
Open element 11 and paste it down in the left corner.
Open element 14 and paste it onto the curtains, duplicate,mirror.
Open element 10 resize to 40% paste it were you want it.
Open element 78 and paste on top of the crystal ball.
 
 
Add copyright, tagname and word art and we are done!
 
Written By Curiouz 27 Sep 2013

23 September 2013

postheadericon I'll bite you scream

I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
 
 
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Arthur Crowe you can get the tubes Here
Scrap kit used Webbed and exlusive at ScrapCandy by Kristin you can find her amazing kit Here
Template used template 203 by Kristin, you can download it on her blog Here
 
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Radience
*~Font i used~*
Blade 2
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Start by delete raster 3, copy of raster 8, raster 8, and raster9.
Make raster 7 active and open paper 10 resize to 400 x 400 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer active and use paper 10 again and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 6 active and open paper 1 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 6 active and open paper 1 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 5 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 5 active and open paper 3 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 4 active and open paper 5 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 4 active and use paper 5 again and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy of raster layer 1 active and add a new raster layer and flood fill with the color you prefer, take a part of the tube you are going to use for you tag, and paste into it.
Then right click the layer, and go to properties - luminance legacy.
add some radience to it with these settings: 138 - 20 - 39 - 200
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make copy (2) of raster layer 1 active and add a new raster layer and flood fill with the color you prefer, take a part of the tube you are going to use for you tag, and paste into it.
Then right click the layer, and go to properties - luminance legacy.
add some radience to it with these settings: 138 - 20 - 39 - 200
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
Make raster 2 active nad open paper 6 and paste as a new layer,invert and delete.
Add some gradient glow with color of choice with these settings:
Width: 3.00
Soft Corners: 25
Overall Opacity: 100%
Now add some bright noise to the graient glow you just added, with what settings you prefer.
~*Elements*~
Make raster 3 active and open string and paste as a new layer.
Open frame 1 and resize 430 x430 and paste as a new layer on top of the webbed string layer.
Open tube you are going to use and paste as a new layer behind the frame, duplicate and move the other part to the top, invert and delete. Use you selection tool to remove parts out side the frame on the top layer.
Open splatter and paste behind your tag, duplicate,mirror,duplicate,flip,duplicate and flip.
Open sparkles and paste as a new layer on top of your tube layer.
Open bat and resize to 40% and paste it were you like it.
Open flame and resize by 50% and flip it to the left and paste it behind your star frames, duplciate and mirror.
Open lightning rezie by 50% and paste it were you want it, duplicate and mirror.
Open rose resize by 50% and paste them were you want it.
Open wire and paste as a new layer on top of raster 5 duplicate,mirror.
Add the words "I'll bite you scream"
 
 
Add copyright and tagname and we are done!
Hope you enjoyed my tutorial
 
Written By Curiouz 23 Sep 2013

20 September 2013

postheadericon The Lady Is A Vamp

I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
 
 
*~Supplies Needed~*
Tube of choice i used the gorjuss art of The Hunter you can get the tubes Here
Scrap kit used Twilight by Bibi Collection you can find her amazing kits Here and Here
Template used Vamp temp by Justine, you can download it over at the Misfit blog Here
 
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
 
Xero - Radience
 
*~Font i used~*
Taggetes
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Make the copy of raster 3 active and open paper 1 and paste as a new layer, invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
 
Now make copy of raster 3 part 2 active and open paper 9 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:

Width: 3.00

Soft Corners: 25%

Overall opacity: 100%

Then add some bright noise to it with these settings:

Intensity: 35

Mix
 
Make raster layer 9 active and open paper 7 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:
Width: 3.00
Soft Corners: 25%
Overall opacity: 100%
Then add some bright noise to it with these settings:
Intensity: 35
Mix
Make raster 6 active and open paper 10 and resize to 400 x 400 and paste as a new layer, invert and delete.
Make the copy of the vector layer 1 active and open paper 8 resize to 600 x 600 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:

Width: 3.00

Soft Corners: 25%

Overall opacity: 100%

Then add some bright noise to it with these settings:

Intensity: 35

Mix
 
Make raster layer 7 active and open paper 6 and resize to 400 x 400 and paste as a new layer,invert and delete.
Make the copy of vector 1 part 2 active and open paper 10 and paste as a new layer,invert and delete.
add some grey gradient glow to it with these settings:

Width: 3.00

Soft Corners: 25%

Overall opacity: 100%

Then add some bright noise to it with these settings:

Intensity: 35

Mix
Delete raster 3.
Now open up the tube ofchoice and paste as a new layer.
Add some radience to it with these settings:
128 - 50 - 128 - 255
 
~*Elements*~
Open element 17 and paste behind your tag duplicate it,mirror it and flip it to you got one in every corner of your tag.
Open element 16 and paste it behind raster 9, duplicate and flip.
Open element 18 rotate it to the left and paste it behind the raster 9.
Open element 25 and paste it on top of raster 9.
Open element 27 and paste as a new layer on top of raster 9.
Open element 30 and paste as a new layer were you want it.
Open element 31 and resize it to 151 x 149 and paste it as a new layer into the first frame picture then promote to layer and remove the parts that sticks outside the frame with your selection tool.
Open element 32 resize it to 448 x 248 and paste it behind raster 9 and let the curten show in bottom of raster 9.
Then duplicate and mirror, then dulpicate and flip.
Make raster 7 active and open element 43 resize it to 400 x 400 and paste as a newl ayer,invert and delete.
Make raster 8 active and open element 43 resize it to 400 x 400 and paste as a newl ayer,invert and delete.
Open element 48 resize it to 40% and paste it were you want it.
Open element 50 resize to 50% and paste it on the bottom of your tag duplicate, mirror and move to bottom.
pen element 68 and paste it on top of your tube layer, duplicate and mirror.
Open element 83 resize to 50% then paste it were you want it.
Open element 97 resize to 80% then paste it behind the rip stone.
Now add copyright, tag name and we are done!
Hope you enjoyed my tutorial :o)
Written By Curiouz 20th Sep 2013

17 September 2013

postheadericon Do You Like My Pumpkins?

I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
 
 
*~Supplies Needed~*
Tube of choice i used the cool art of Danny Lee you can get the tubes Here
Scrap kit used Halloween Pumpkin by Bibi Collection you can find her amazing kits Here
Template used template 275 by Millie, you can download it on her blog Here
 
 
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Vm Distrotion - Broken Mirror
 
 
*~Font i used~*
Anderson The Mysterons
 
 
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
 
Start by making layer 1 active and open paper 8 and paste as a new layer,invert and delete.
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a neon green color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
 
Make layer 2 active and open paper 5 and paste as a new layer,invert and delete.
add bright noise to it with these settings:
Intesity: 35
Mix
Now we are going to add some gradient glow to it
Add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a neon green color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
 
Duplicate and mirror
move so only the gradient glow we made shows outside layer 3 when you are happy
delete layer 3.
 
 
Make layer 4 active and open paper 7 and paste as a new layer,invert and delete.
then before you merge down make layer 4 active again and open paper 1 and paste as a new layer,invert and delete.
Now go to the layer with the orange paper and add some bright noise to it.
With these settings:
Intensity: 40
Lighter
Then move to the green paper layer and go to your filter "Vm Distrotion - Broken mirorr
with these settings: 16 - 16 - 16 - 92 - 0 - 92
Then we are going to add some fritillary to it by going to our Xero filter - Fritillary
With this settings: 5 - 30 - 10 - 0
Now make layer 4 active again and a
add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a neon green color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
 
 
Make layer 5 active and open paper 7 and paste as a new layer,invert and delete.
Now we are going to add some gradient glow to it
 
Add gradient glow in white with these settings:
Width: 3.00
 
     Soft corners: 25%
       
Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a orange color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Duplicate this layer and mirror it when you only see the gradient glow outside the layer 6 delete layer 6.
 
 
Make layer 7 active and open paper 2 resize to 500 x 500 and paste as a new layer, invert and delete.
Now we are going to add some gradient glow to it
 
Add gradient glow in white with these settings:
Width: 3.00 Soft corners: 25% Drag the arrow to almost full to get a compact color.
Now add one more gradient glow to same layer, a orange color. with same settings.
We are now adding some bright noise to it by using Dsb Flux filter.
With these settings:
Intesity: 45
Mix
Duplicate this layer and mirror it, when you only see the gradient glow outside the layer 8 delete layer 8.
 
 
Delete layer 9 and 10.
 
~*Elements*~
Open element 8 and paste it on top of layer 7 into the corner of the first square, duplicate and mirror.
Open element 1 and paste it on top of layer 7, use your selction tool and remove the bottom of the element so it looks like it stick through the frames.
Duplicate and mirror.
Open element 18 and paste on top of layer 5 in the corner to the top, duplicate,mirror.
add some sahdow to it. duplicate and flip,then duplicate and mirror.
Open element 22 and paste it on top of layer 4.
Open element 29 and paste it on top of the fence layer.
Open element 32 and paste in to top of layer 4 duplicate and flip.
Open element 33 and resize it to 67% and paste it as a new layer on top of layer 4
Open element 36 and paste it on top of layer 1 and duplicate mirror,duplicate and flip. do this until you have it in all 4 corners in back of your tag.
Now open the tube and paste it as a new layer.
Open element 48 and paste it on top of tube a few times to make it pop!
Open element 64 resize to 52% rotate it 90 to the left and paste it on the side of the frame layer. duplicate and mirror.
Open element 34 resize to 50% then paste it on your tag were you want it.
duplicate and mirror.
Now add the text " Do You Like My Pumpkins"
Add copyright and tag name and we are done!
Written By Curiouz 17th Sep 2013

13 September 2013

postheadericon Alice In Wonderland

I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
 
 
*~Supplies Needed~*
Tube of choice i used the gorjuss art of  Danny Lee you can get the tubes Here
Scrap kit used Alice by Bibi Collection you can find her amazing kits Here
Template used template 103 by Millie, you can download it on her blog Here
Mask of choice i used Cmc _linesgrids-kristin-mask-5 by Kristin
 
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
 
Xero - Radience
 
 
*~Font i used~*
Alice in Wonderland
 
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Make layer 1 active and open paper 9 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Make layer 3 active and open paper 10 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Make layer 4 active and open paper 10 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Make layer 5 active and open paper 1 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Make layer 6 active and open paper 4 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
Merge down layer 7 & 8 and make the merged layer active and open paper 1 and paste as a new layer,invert and delete.
Add light grey gradient glow to it with width of 3.00
Then add some bright noise to it with these settings:
Intensity: 45
Mix
*Elements*
Open element 102 and paste as a new layer on top of layer 10.
Open element 3 and paste as a new layer in the bottom of your tag behind all layers so it looks like a floor.
Open element 52 resize 50% and paste as a new layer on top of layer 9.
Open element 99 and paste as a new layer on top of layer 9.
open element 76 resize 60% paste it were you want it.
open element 75 resize to 60% and paste it were you want it.
open element 68 paste as a new layer on top of the floor layer and duplicate and mirror, duplicate and flip and duplicate and mirror.
open element 63 resize to 60% paste as a new layer on top of the floor layer and duplicate and mirror, duplicate and flip and duplicate and mirror.
Open element 6 and paste as a new layer on top of the layer 12 into the circle frames, duplicate then mirror.
open element 59 resize to 50% and paste as a new layer on top of layer 10 duplicate and mirror.
open element 50 and paste it were you want.
Open element 2 resize to 50% and paste it on top of layer 10 duplicate and mirror.
open element 126 and resize to 50% place it on top of layer 12 to the left then duplicate and mirror.
Open element 112 paste behind your tag duplicate and mirror so you get on sticking from each
corner behind your tag.
Open element 98 resize to 50% and paste it were you want on the tag.
Open your tube of choice and paste as a new layer on to your tag.
add some radience by going to your filter Xero - Radience
These settings:
233 - 158 - 63 - 206
open element 16 and paste on top of your tube
Now open a new raster layer flood fill with black use the mask of choice and paste it behind your tag.
Add the words "Well, when I was lost, I suppose it's good advice to stay where you are until someone finds you. But who'd ever think to look for me here?"
Add copyright, tagname and we are done!
 
Hope you enjoyed my tutorial!
Written by Curiouz 13th Sep 2013

postheadericon Queen of the night

I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
 
 
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Verymany you can get the tubes Here
Scrap kit used Voodoo Cutie 2 by Kristin you can find her amazing kits Here
Template used template 203 by Kristin, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
Dsb Flux - Bright Noise
Xero - Fritillary
Xero - Radience
 
 
*~Font i used~*
Mirella Script
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Make raster 7 active and open paper 11 and paste as a new layer, invert and delete.
Now lets add some bright noise to it with these settings:
Intensity: 45
Mix
add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make the copy of raster 7 active and open paper 11 and paste as a new layer, invert and delete.
Now lets add some bright noise to it with these settings:
Intensity: 45
Mix
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 6 active and open paper 6 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make copy of raster 6 active and open paper 6 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 5 active and open paper 7 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Now make the copy of raster 5 active and open paper 7 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 4 active and open paper 9 and paste as a new layer ,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some brisght noise to it with these settings:
Intensity: 51
Mix
Make copy of raster 4 active and open paper 9 and paste as a new layer ,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make copy of raster 1 active and add a new raster layer flood fill with a dark brown.
lets add some bright noise to it with these settings:
Intensity: 51
Mix
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make the copy (2) of raster layer active and add a new raster layer flood fill with a dark brown.
lets add some bright noise to it with these settings:
Intensity: 51
Mix
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Now make raster layer 2 active and open paper 1 and paste as a new layer,invert and delete.
Lets add some fritillary to it by going to our Xero filter and choose Fritillary
With these settings:
5- 30 - 10 - 0
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 9 active and change the color to black.
Merge down raster 8 and copy of rater 8 and make the merged layer active open paper 11 and paste as a new layer,invert and delete.
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Now lets add some bright noise to it with these settings:
Intensity: 51
Mix
Make raster 3 active and add a new raster layer, flodd fill with a dark brown.
Now lets add some bright noise to it with these settings:
Intensity: 50
Mix
~*Elements*~
Open frame 3 and paste as a new layer on your tag.
add some bright noise to it with these settings:
Intensity: 50
Mix
Lets add some gradient glow to it by using a dark brown color.
These Settings:
Width: 4.0
Soft corners: 25
Overall opacity: 100
Open filmstrip and add some radience to it with these settings:
126 - 50 - 125 - 255
add a new raster layer to it flood fill with a color you want and move to bottom.
Add 2 parts you like from your tube into the windows of the frame.
then open the doll and resize yo 40% and paste into the 2 other windows.
Merge down the layers with the tubes in and go to properities choose luminance legacy.
Then add some radience to it with these settings:
128 - 50 - 128 - 255
Copy merged and paste as a new layer on top of your tag.
Open frame 2 and paste it on top of the frame 3 layer.
Open flame resize to 40% and paste on top of the frame 3 layer on to in each corners.
then flip them.
Open splatter and paste as a new layer behind the whole tag, duplicate and mirror, duplicate and flip and duplicate and mirror.
Open swirl and paste as a new layer ontop of the raster 3 duplicate and mirror.
Open tube of choice and paste as a new layer.
Open sparkles and paste on top of the tube layer.
Add copyright, name and words of choice and we are done!
 
 
Hope you enjoyed my tutorial.
Written by Curiouz 13th Sep 2013

12 September 2013

postheadericon Very Important Princess

I use Paint Shop 9 for my tutorials,you should know your way
around in paint shop to use this tutorial...
~¤This is what we are going to make¤~
 
 
*~Supplies Needed~*
Tube of choice i used the gorjuss art of Marc Duval you can get the tubes Here
Scrap kit used Lost Princess by Bibi Collection you can find her amazing kits Here
Template used template 106 by Millie, you can download it on her blog Here
*~Filter Used~*
Eye Candy 4 - Gradient Glow
VanDerLee-Unplugged X- Interlace
Xero - Fritillary
Dsb Flux - Bright Noise
 
 
*~Font i used~*
LainieDay
Ok let us start...
Open template and press shift + D to duplicate the template and close the original.
Start by merge down layer 1 and 2.
Then make layer 1 active and open paper 9 and paste as a new layer, invert and delete.
Now we are going to add some fritillary to it so we go to our filter "Xero" and find the one called "fritillary"
With these settings:
5- 30- 10- 0
Now we are going to add some gradient glow to with these settings:
Color: of choice i used purple
Width: 3.0
Soft corners: 25%
Overall opacity: 100%
Move the arrow to alsmost full to get a compact color.
Then we are going to add some bright noise to it so we make only the border we made active with the magic wand and we go to our filter dsb flux- bright noise with these settings:
Intensity: 31
Lighter
 
Now make layer 3 active and open paper 6 and paste as a new layer, invert nad delete.
We are adding some bright noise to this layer so we go to our filter dsb flux- bright noise with these settings:
Intensity: 31
Lighter
Now we are adding some gradient glow as well with these settings:
Color: of choice i used purple
Width: 3.0
Soft corners: 25%
Overall opacity: 100%
Then make some bright noise on the border we made as well
Intensity: 31
Lighter
 
Now make layer 4 active and open paper 6 and paste as a new layer, invert and delete.
We are adding some bright noise to this layer so we go to our filter dsb flux- bright noise with these settings:
Intensity: 31
Mix
Now we are adding some gradient glow as well with these settings:
Color: of choice i used purple
Width: 3.0
Soft corners: 25%
Overall opacity: 100%
Then add some bright noise to the border with the same settings.
Delete layer 5.
Merge down layer 6 and 7 .
Make the layer 6 active and open paper 9 and paste as a new layer,invert and delete.
Now we are going to add some fritillary to it so we go to our filter "Xero" and find the one called "fritillary"
With these settings:
5- 30- 10- 0
Now we are adding some gradient glow as well with these settings:
Color: of choice i used purple
Width: 3.0
Soft corners: 25%
Overall opacity: 100%
Then make some bright noise on the border we made as well
Intensity: 31
Lighter
 
Merge down layer 8 and 9.
And make the layer 8 active and open paper 6 and paste as a new layer, invert and delete.
Now we are going to add some fritillary to it so we go to our filter "Xero" and find the one called "fritillary"
With these settings:
5- 30- 10- 0
Now we are adding some gradient glow as well with these settings:
Color: of choice i used purple
Width: 3.0
Soft corners: 25%
Overall opacity: 100%
Then make some bright noise on the border we made as well
Intensity: 31
Lighter
~*Elements*~
Open element 1 and resize by 60% and paste as a new layer on top of layer 4
add some radience to it by go to your filter Xero - radience with these settings:
128 - 50 - 128 - 255
Open element 17 and paste on top of the layer 6 behind the circles duplicate and mirror.
Open element 18 resize to 500 x 500 and paste onto of the layer 6 over the castle.
Open the element 30 and paste as a new layer on top of layer 8 duplicate flip.
Open element 39 and paste as a new layer ontop of layer 1 duplicate mirror , duplicate and flip and duplicate and mirror.
Open element 8 and paste as a new layer on top of layer 8.
Open element 78 and paste behind the whole tag on a new layer add some bright noise to it and duplicate and flip.
 
Add word art, tag name and copyright and we are done!
Hope you enjoyed my tutorial
Written by Curiouz 12th Sep 2013.

Take My Blinkie

Take My Blinkie

Terms of Use

Please download these from my blogsite only. Do not share the files in emails/groups/blogs etc. If you'd like to use them in a tag tutorial /group challenge - you can do that. But please direct others to my blogsite to download for themselves. And no linking to my download link itself - just the blogsite link, please. Personal use only please don't change any of the scraps or accents (Word art is ok to change color,size) Please do not change the file names or claim as your own, nor re-upload them to any file sharing sites. Thank you for downloading and have fun

I Ct For

My Licenses

Arthur Crowe - AC128


Barbara Jensen - BJ1551


Danny Lee - DL0014


Elias Chatzoudis - EAS11359


Gorjuss - SW2251


Keith Garvey - KG1057


Rachael Tallamy - 011066Curiouz


Roman Zaric - RZ083


The Hunter - APSS0144


Tony Tzanoukakis - TTZ115


TooshToosh - Toosh1365


Verymany - VMT_Curiouz


Xeracx - IRM015A


Zindy Zone - ZZT1089


Ami - AMICURIZ


Cilm - CI3927LM


Cdo - Cdo-2090


Dreamscape Imaging - DSI780


My psp tubes - MPT8644


Pics For Design - PFD_Curiouz


Pte - PTE0758


Satc - SATC0096


StickerChick - Stickerchick3120


The psp Project - TPP00144


Up Your Art - UpYourArt3406





Follow by Email

Translate

Contributors

Blog Friends

Popular Posts