I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED
Tube of choice i am using the art of Alex Prihodko you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Coconut" By Bibi you can find the kit HERE

Template 182 By Kristin HERE

Mask of choice

Font used Dobkin

Plugins used Unplugged X - EyeCandy4000

OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Make top grey square active and open paper 1 (blue) and paste as a new layer
Make bottom grey square active and open paper 1 (blue) and paste as a new layer

Now go to vanderlee-unplugged x- interlace
with these settings:
1-50-50-1-0-50 soft light

do this action to both top and bottom grey square.

Now make top pink rectangle active and open paper 3 (green) and paste as a new layer.

Then make bottom pink rectangle active and open paper 3 (green) and paste as a new layer.

Now make top blue square active and open paper 3 (pink) and paste as a new layer.

Then make bottom blue square active and open paper 3 (pink) and paste as a new layer.
Now go to vanderlee-unplugged x- interlace
with these settings:
1-50-50-1-0-50 soft light

Do this action to both top and bottom blue square.

Move up to circle and open paper 1 (blue)
and paste as a new layer.

Now go to vanderlee-unplugged x- interlace
with these settings:
1-50-50-1-0-50 soft light

Remove these layers: stars,black thin rectangle, round rectangle and
creadits.

Now add some gradient glow to all your layers, you choose what color.
Or simply just add shadow.

Elements:
Mark circle and open element 67 and paste as a new layer, invert and
delete set opacity to 72%

Open element 1 and paste behind the cirlce layer were you want it and duplicate flip and mirror it.

Open element 21 and paste it as many times you want on top of top and bottom blue rectangle.

Open element 26 and paste as a new layer behind the circle layer.

Open element 27 and paste it on the side of the frame and duplicate
and mirror it.

Open element 31 and paste on top of cirlce and duplicate and mirror it.

Now go to background and make it active, flodd fill with a color
of choice, then add mask of choice.

Open element 57 and paste as a new layer on top of circle and duplicate and
mirror.

Now add signature and copyright and we are done=)
(WRITTEN BY CURIOUZ 18 JUNE 2012)

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED

Tube of choice i am using the art of Danny Lee you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Hellz Angel" By Toxic Desirez you can find the kit HERE

Template 170 By Kristin HERE

Mask of choice i used mask 122 by Design By Vaybs HERE

Font used Suger Death

Plugins used Xero - Unplugged X - EyeCandy4000 - L & K Zitah


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Start at bottom and make thin top rectangle active, mark and open paper 3
and paste as a new layer.
Then go to Xero-Fritillary
With these settings: 5-30-10-21

Now make thin bottom rectangle active , mark and open paper 3
and paste as a new layer.
Then go to Xero-Fritillary
With these settings: 5-30-10-21

Now move up and make purple top rectangle active, mark and open paper 16
and paste as a new layer.

Move up and make purple bottom rectangle active, mark and open paper 16
and paste as a new layer.

Make blue top rectangle active, mark and open paper 10 and paste as a new
layer.

Make blue rectangle bottom active, mark and open paper 10
and paste as a new layer.

Make purple top rectangle active, mark and open paper 13 and
paste as a new layer.

Make purple bottom rectangle active, mark and open paper 13 and
paste as a new layer.

Now make pink cirlce left active, mark and flood fill with black
Then go to Xero-Fritillary
With these settings: 5-30-10-21

Then make pink cirlce right active, mark and flood fill with black.
Then go to Xero-Fritillary
With these settings: 5-30-10-21

Now make the circle active mark and open paper 11 and
paste as a new layer.

Elements:
Open web and paste it on top of cirlce layer.
Now open film strip add a new rater layer and flodd fill with black.
Then take parts of the tube and paste it into all the windows in the
film strip frame.
Now go to xero-radience
With these settings: 44- 58-189-222

Now merge only the tube layers, and duplicate.
Go to the original tube layer and go to properties - luminance legacy.
Then go to the duplicated tube layer and go to properties - screen.

Then again go to the original tube layer and go to plugins
L & K Zitah
With these settings: 5-33-37-47-69-66-57-32

Then again go to the duplicated tube layer and go to plugins
L & K Zitah
With these settings: 5-33-37-47-69-66-57-32

Then go to vanderlee- unplugged x-interlace
With these settings: 1-50-50-1-0-50
Do this to both orginal and duplicated tube layer.
Then merge all and paste the film strip as a new layer ontop of the web

Open doodle and put some gradient glow on it, then paste it behind the film strip.

Open splatter and paste it over the thin top layer then duplicate
and flip and mirror it and move it up to bottom thin rectangle.

Open sparkles and place it as a new layer on top of film strip.

Open skulls and paste them were you want.

Now flood fill the background layer with black, add mask of choice.

Now paste your tube as a new layer

Then add signature and copyright and we are done=)

(WRITTEN BY CURIOUZ 21 AUG 2012)

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED

Tube of choice i am using the art of Zlata M you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Total Rebel" By Toxic Desirez you can find the kit HERE

Template 174 By Kristin HERE

Mask of choice i used mask CMC-LinesGrids-mask1 by Kristin HERE

Font used Fely

Plugins used Xero - Unplugged X - EyeCandy4000-L & K Zitah


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Make top grey rectangle active then mark
go to Xero - fritalliry
with these settings: 7-30-12-39

Make bottom grey rectangle active then mark
go to Xero - fritalliry
with these settings: 7-30-12-39

Make top maroon rectangle active then mark
and open paper 9 and paste as a new layer.

Make bottom maroon rectangle active then mark
and open paper 9 and paste as a new layer.

Make top pink cirlce active mark and open
paper 7 and paste as a new layer.

Make bottom pink cirlce active mark and open
paper 7 and paste as a new layer.

Make top blue rectangle active then mark and open
paper 14 and paste as a new layer.

Make bottom blue rectangle active then mark and open
paper 14 and paste as a new layer.

Make balck round rectangle active, mark and open tube of choice and
paste as a new layer. Use your moving tool to get it were you want it.
Invert and delete, duplicate and mirror.

Duplicate both tube layers again so you have two of both of them.

Go to orginal tube layer 1 and go to properties - luminance legacy
then make orginal tube layer 2 active and go to properties - screen

Go to duplicated tube layer 1 and go to properties - luminance legacy
then make dupøicated tube layer 2 active and go to properties - screen

Go make black round rectangle active and go to
xero-fritillary
with these settings: 7-30-12-39

Now go to top orginal tube layer
then to unlpugged x - interlace
with these settings: 1-50-50-1-0-50

Then go to top duplicated tube layer
then to unlpugged x - interlace
with these settings: 1-50-50-1-0-50

Then do this to both top tube layers
go to L and K Zitah
With these settings: 5-33-37-47-69-66-57-32

Now make black circle active then mark and open paper 4
and paste as a new layer.

Now go back and add drop shadow to all the template layers i you did not do it already!

Elements:
take film strip and paste it behind the black round rectangle layer
duplicate and flip.

Open sparkles and paste as a new layer on top of the tube layers.

Open frame 2 and paste as a new layer on top of cirlce layer.

Open tube of choice and paste as a new layer on top of circle layer
duplicate and move on top of frame 2.

Use your free hand tool and remove parts of the tubes you do not want there so it looks like the girl is standing inside frame 2.

Put on some radience if you want to.

Open element flame and paste on top of top and bottom
grey rectangle, duplicate as many times you like
move and flip. i decided at this point to remove both
top and bottom grey rectangles it looked so much better
with only the silver flames=)

Now make background layer active and flood fill with black,
choose a mask and add.
Then add a new reaster layer and flood fill with a light grey color
go to dbs flux- bright noise
these settings: lighter 47
and add the same mask.
then duplicate the black mask layer and mirror it and move both black mask layer under the silver grey one.


Then add your signature,copyright and we
are done!

(WRITTEN BY CURIOUZ 18 AUG 2012)

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED

Tube of choice i am using the art of Danny Lee you can buy HERE

(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Sweet Music 2" By Toxic Desirez you can find the kit HERE

Template 177 By Kristin HERE

Font used Dk Criss Cross, BillyBop

Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Start at bottom and make top black square active
mark with your magic wand tool and open paper 11
and paste as a new layer.

Make bottom black square active then mark and open paper 11
and paste as a new layer.

Move up and make top red circle active and open paper 9
and paste as a new layer...

Then move up to bottom red circle and make it active then mark and
open paper 9 and paste as a new layer.

Move up and make top rectangle active and mark and open
paper 2 and paste as a new layer.
Then go to Xero- Fritillary
With these settings: 7 - 30 - 12 - 39

Move up and make bottom red rectangle active mark and open paper 2
and paste as a new layer.
Then go to Xero- Fritillary
With these settings: 7 - 30 - 12 - 39

Make round rectangle active and flood fill with a light grey color and
open tube of choice and paste.
duplicate the tube layer and mirror it,
duplicate both tube layers.

Make the orginal tube layer active and go to properties and
choose luminance legacy, then go to the duplicated layer and choose
soft light.

Make the duplicated tube layer active and go to properties and
choose luminance legacy, then go to the duplicated 2 layer and choose
soft light.

Now go to xero . radiance
with these settings:
128-50-128-255
Do this to all tube layers.

Make round rectangle active again and go to
VanDer Lee - Unplugged X - Interlace
With these settings: 1-50-50-1-0-50

Move up and make circle layer active and mark and open paper 21
paste as a new layer.

Elements:
Open frame 1 and paste as a new layer on top
of circle layer.
Open element scatter and paste on background layer as a new layer and
duplicate adn flip it.

Open skull & web element and paste as a new layer behind round rectangle.
duplicate and flip it.

Open speaker and paste as a new layer on top of circle layer into the frame 1.

Open element wire and paste on top of frame1 and under the speaker layer.

open element note circle and paste as a new layer on top balck square layer.

Gradient glow with a red color.

Paste the tube of choice as a new layer and
go to Xero - Radience
This settings: 128-50-128-255

Now add the word art you want.
Signature and copyright and we are done:o)


(WRITTEN BY CURIOUZ 18 AGU 2012)

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED
Tube of choice i am using the art of Ismael Rac you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Fashion" By Bibi's Collection you can find the kit HERE

Template kk temp10 By Kandi Kissez HERE

Font used Amaldemo

Plugins used Xero - Unplugged X - EyeCandy4000- L and K Zitah

OK LET US START!

Open up the template shift + d to duplicate it and close out the original.
Start by deleting credits, blue heart, stars and pink circle 1

Use your dropper tool and steal a pink color from paper 4
then make black rectangle active and flodd fill with the choosen color.
Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32
add drop shadow

Now move up to pink circle and make it active open paper 3
add as a new layer...

Move up to black circle and make it active mark and open
paper 2 and add as a new layer...

Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32
add drop shadow

Make blue rectangle active and mark and open paper 4
paste as a new layer..
add drop shadow.

Make angled rectangle active and mark and open tube of choice
and paste as a new layer, invert and delete.
Duplicate tube layer and make the orginal tube layer active
go to properties and choose luminance legacy.
Move up to duplicated tube layer and go to properties
and choose soft light..
Mark the orginal tube layer
Now go to plugin L And K
Zitah
With these settings:
5 - 33 - 37 - 47 - 69 - 66 - 57 - 32
Now go to the duplicated tube layer
Now go to plugin L And K
Zitah
With these settings:
5 - 33 - 37 - 47 - 69 - 66 - 57 - 32

Then mark the orginal tube layer again and go to
Xero- Radiance
With these settings: 128 - 50 - 128 - 255

Then mark the duplicated tube layer and
Xero- Radiance
With these settings: 128 - 50 - 128 - 255

Now make the white circle active and
go to Xero - Fritillary
With these settings:
7 - 30 - 12 - 39

Make white circle active
Then go to xero- fritillary
with these settings: 7 - 30 - 12 - 32
add drop shadow

Elements:
Open element 68 and paste on top of black cirlce layer.

Open element 14 and paste it on top of layer angled rectangle and
blue rectangle.

Open element 18 resize 60% and paste as a new layer on top of
pink circle layer 2.

Open element 22 and paste on top of black circle.

Open element 24 and paste on top of black rectangle were you want it.

Now add the signature and copyright:)

(WRITTEN BY CURIOUZ 18 AUG 2012)