I use paint shop 9 for my tutorials

You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED

Tube of choice i am using the art of  Skyscraps you can buy  HERE

(Please do not use this tube without a license to do so!!!)

Scrap Kit used "KissMyAzz"  By Bibi Collection you can find the kit HERE

Template 184 By Kristin HERE

Font used calligraPhillip

OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Start at the bottom with top circle mark and open paper 3 (pink) and paste as a new layer.

Now move up to bottom circle mark and open paper 3 (pink) and paste as a new layer.

Now move up to top square mark and open paper 3 (blue) and paste as a new layer.

And now on the bottom square mark and open paper 3 (blue) and paste as new layer.

Move up to top rectangle layer mark and open paper 6 and paste as a new layer.

Then up to bottom rectangle layer mark and open paper 6 and paste as a new layer.

On the round rectangle layer mark and open paper 2 and paste as a new layer..

Now go to circle layer and open paper 3 (blue) and paste as a new layer.

Open the tube of choice and resize to what size you need and paste as a new layer on top of circle.

Elements:

Open element 67 and paste as a new layer on top of circle layer.

Open element 69 and paste as a new layer on background.

Open element 10 and paste on the bottom square layer so it shows, 

duplicate and flip.

Open element 11 and paste it as a new layer on the cirlce layer.

Open element 12 and paste on top of circle layer.

Open element 26 and paste under circle layer duplicate

and flip..

Open element 32 and paste were you want them.

Open element 21 and paste it were you want it.

Open element 50 and paste it as a new layer on top of circle layer.

Open element 51 and paste as a new layer on top of circle layer.

Open element 80 and paste as a new layer were you want it..

(WRITTEN BY CURIOUZ 21 JULY 2012)

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED

Tube of choice i am using the art of Danny Lee you can buy HERE
(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Black Heart" By Toxic Desirez you can find the kit HERE

Template 179 By Kristin HERE

¨
Mask of choice i used mask by Kristin HERE

Font used 48ver lost

Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Start at bottom with top black square mark and open paper 10
and paste as a new layer.

Then move up to bottom black square mark and open paper 10
and paste as a new layer.

Go to rectangle mark and open paper 9 and paste
as a new layer.

Move up to top red circle mark and open paper 16 and
paste as a new layer.
Then go to Xero - Fritillary
With these settings: 5 - 30 - 10 - 0

Now bottom red circle mark and open paper 16
and paste as a new layer.
Then go to Xero - Fritillary
With these settings: 5 - 30 - 10 - 0

On to top round rectangle mark and open paper
7 and paste as a new layer..

Then to bottom round rectangle

mark and open paper 7 and paste as a new layer.

Go to circle mark and go to xero - frtillary
With these settings: 5 - 30 - 10 - 0

Choose a lyric you like and that fits the tube and paste it into
cirlce layer.

Elements:
Now open frame 2 and paste as a new layer

Open collar resize 40% and paste were you want it..

Open butterfly resize to 30% and paste were you like it.

Open flower 1 resize to 30% and paste it were you want it.

Open sparkles and paste it as a new alyer on bottom round rectangle.

Open frame 1 and paste as a new layer on top of bottom round rectangle.

Open a new canvas 750 X 650 and floodfill with black and add mask of choice.

Now add tube of choice,signature and copyright!

(WRITTEN BY CURIOUZ 11 JULY 2012)

I use paint shop 9 for my tutorials
You should know your way around in paint shop to use this tutorial...
THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED
Tube of choice i am using the art of Ismael Rac you can buy HERE
(Please do not use this tube without a license to do so!!!)
Scrap Kit used "Strawberry Passion" By Bibi you can find the kit HERE
Template 2 By Ella
Font used Sagimaw light
Plugins used Xero - Unplugged X - EyeCandy4000


OK LET US START!
Open up the template shift + d to duplicate it and close out the original.
Remove rec1 and rec2 layers.
Rotate Clockwise 90

Start with the frame layer mark and flodd fill with this color #dc2837
Then dbs flux - bright noise
With these settings: 32 Mix

Now on to rec3 mark and open your close up tube of
choice and paste as a new layer.
Now right click and choose properties luminance legacy
duplicate and right click then properties
this time choose hard light.

Now go to unplugged x
With these settings: 1 - 50 - 50 - 1 - 0 - 50

Now take the tube of chocie and paste to the left or right for the frame and

Then go Xero - Porcelain
With these settings: 50 - 128 - 128 - 0 - 0 - 255

Elements!
Open element 10 and paste behind the rec1 and duplicate and move around as you like.
Open element 12 and paste on the mesh layer and duplicate 5 times and move up one and duplcate that 5 times as well.

Open element 16 resize to 70% and paste behind the legs of your tube.
Open element 17 and resize to 50% and paste behind the legs of your tube.
Open element 19 resize 60% and paste it besides the feet of your tube to the left.
Open element 21 and paste as a new layer on the mesh layer duplicate and flip.
Open element 2 and paste as a new layer on to the frame layer.
Open element 23 and place the drake inside the hand of your tube.
Open element 30 resize to 50% and paste near the tubes leg infront of all the others.
Now add the words,signature and copyright and we are done :o)

(WRITTEN BY CURIOUZ 8 JULY 2012)

I use paint shop 9 for my tutorials

You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED

Tube of choice i am using the art of  Alex Prihodko you can buy  HERE

(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Lemon"  By Bibi you can find the kit HERE

Template By  Melissaz Creationz HERE

Mask of choice i used mask by Kristin HERE

Font used Dobkin

Plugins used Xero - Dbs Flux - Unplugged X 

OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Start at the bottom with raster 1 mark and open paper 2 and paste a a new layer.

Go to dbs flux - bright noise 

With these settings: Intensity 41 Mix

Then go to layer merged and steal a bright green color from the paper 2 and flood fill with it.

Then go to Xero - Fritillary

With these settings: 5 - 30 - 10 - 21

Now go to raster 2 and mark with your magic wand tool, invert and use same color you stole from paper 2 before, and flood fill with it.

Go to dbs flux - bright noise 

With these settings: Intensity 41 Mix

Now to the other merged layer "the frames"

make them both black.

Then up to raster 4 mark and open paper 2 again resize to 50% and paste as a 

new layer invert and delete.

Go to raster 3 "frame" and make it black.

Then you open a new canvas 700 x 700 and flodd fill with what color

you like and add your mask layer to it.

Mark raster 4  then open up the close up of

 the tube you want to use, then duplicate it.

Go to properties luminance legacy.

Then go to the duplicated layer and properties and screen.

Open element 5 and paste it on each side of the frames.

Open element 32 resize to 41% then paste it on top of

the merged rectangles then duplicate and flip.

Open element 31 resize to 41% and paste near the flowers then duplicate and mirror.

Open element 23 and paste it behind raster 1 duplicate and mirror.

Open element 50 then go to dbs flux - bright noise

With these settings: Intensity 41 Lighter

Now add word art, signature and copyright

and we are done!

(WRITTEN BY CURIOUZ 7 JULY 2012)

I use paint shop 9 for my tutorials

You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED

Tube of choice I am using the art of Arthur Crowe HERE

(Please do not use this tube without a license to do so!!!)

Scrap Kit used "Toxic Punk 2"  By Toxic Desirez you can find the kit HERE

Template 180  By  Kristin HERE

Mask of choice i used mask by Kristin HERE

Font used 914 Solid

Plugins used Xero - Unplugged X - EyeCandy4000

OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Start at the bottom with "Top Purple Rectangle" 

mark and open paper 21 and paste as a new layer

Now move up to "Bottom Purple Rectangle"

mark and open paper 21 and paste as a new layer.

Now on to layer "Top Purple Circle"

mark and open paper 10 and paste as a new layer.

on to layer "Bottom Purple Circle"

mark and open paper 10 and paste as a new layer.

Now move up to "Top Round Rectangle" mark and open 

paper 12 and paste as a new layer.

Then up to "Bottom Round Rectangle"  mark and open 

paper 12 and paste as a new layer.

Now up to layer "Cricle" and open paper 25 and paste as new layer.

Now move uo to the last layer "Rectangle" mark 

and open paper 9 and paste as a new layer.

Now open filmstrip and and paper  5 and paste the paper 5 as a new layer on top of the filmstrip and move the filmstrip to the top.

Now take some parts of the tube you want to use resize to fit the filmstrip frames. Then paste as a new layer and promote to layer and do this again until you have filled all frames.

Now merge the tube layers down and go to properties luminance legacy and duplicate and again go to properties and choose screen.

Now go to Xero - Fritillary

With these settings:  3 - 43 - 12 - 20

Now open the tube of choice and paste asa new layer.

Then go to Xero - Radience

With these settings: 128 - 50 - 128 - 255

Now open a new cnvas 750 X 650 and flood fill with a purple from

scrap kit and use the mask of choice.

Open word art and paste as a new layer on the circle layer.

Open web and paste as a new layer on top of mask layer.

Open sparkles and paste as a new layer on top of cirlce duplicate 5 times.

Open logo and paste on top of rectangle.

Open frame 2 and paste on top of rectangle.

Open discoball and paste on top of circle.

Now add copyright and signature and we are done!

(WRITTEN BY CURIOUZ 5 JULY 2012)

I use paint shop 9 for my tutorials

You should know your way around in paint shop to use this tutorial...

THIS IS WHAT WE ARE GOING TO MAKE!

TOOLS NEEDED

Tube of choice i am using the art of Arthur Crowe this is an exclusive tube 

for the members of Creative Misfit Forum 

Scrap Kit used "Wicked 2"  By Toxic Desirez you can find the kit HERE

 halloween template 5 By  Kristin HERE

Mask of choice i used CMC-LineGrid Mask 5 By Kristin HERE

Font used sick capital vice

Plugins used Xero - Unplugged X 

OK LET US START!

Open up the template shift + d to duplicate it and close out the original.

Delete these layers credits , bat , word art,word art back, pixel words, bats

stars and rectangle.

Now start at the bottom with the layer "dotted circle" 

go to layers - new adjustment layer - hue/saturation/lightness

and make this layer black.

Then go to left circle green mark and open paper 2 and paste as a new layer.

Then go to xero- fritillary

With these settings: 3 - 15 - 9 - 53

Now move up to right circle green and mark and open paper 2 again and paste as a new layer.

Then go to left circle green mark and open paper 2 and paste as a new layer.

Then go to xero- fritillary

With these settings: 3 - 15 - 9 - 53

Then up to circle layer mark and add a new raste layer, steal a pink color from the kit and flood fill with it.

Then go to dbs flux - bright noise

With these settings: Intensity 47 Mix

Now move up to thin circle mark and open paper  13 and paste as a new layer.

Then move up to gradient circle mark and open paper 7 and paste as a new layer.

Open a new vector background 692 X 157

flood fill with a light pink color.

Then open filmstrip and paste it as a new layer

on top of the new vector layer.

Then open up the tube you are going to use and resize it to your likings and paste it as a new layer on the vector layer then promote it to layer do this 3 more times so you have filled all frames in the filmstrip. 

Then use your freehand tool to remove overflood from the tube that shows in the other frames then the one it is suppose to show in.

Then go to properties choose luminance legacy and duplicate and choose screen.

Then go to xero - porcelain

With thse settings:  50 - 128 - 128 -0 - 0 - 255

Now  open a new vector background 700 X 600

flood fill with black and use the mask of choice.

Open studs resize to 41% and paste them on to of the filmstrip and duplicate and flip them.

Open star 3 and paste it on the top of the left and right circle green.

Open star 1 and paste in the middle of the star 3's you just pasted.

Open skullchain and resize to 50% and paste we you want it then duplicate and mirror it.

Open glitter 2 and paste as a new layer on top of mask layer.

Open glitter trail and paste it behind the filmstrip layer and

duplicate and flip it.

Open glitter 1 and paste as a new layer behind the filmstrip.

Open bow 1 resize to 31% and paste it were you like.

Now find a font you would like to use and write what you want.

Then add signature and copyright!

(WRITTEN BY CURIOUZ 1 JULY 2012)